SoloGood F722 Stack F722 Flight Controller BLHELI_S 60A 4in1 BLS60A ESC 30.5X30.5mm 2-6S Designed for 7-10inch FPV Drone

Support up to 8 motor outputs to easily build X8 drones. Integrated 5V/10V dual BEC ensures stable operation Four LED status indicators display the working status under different states. Although the flight control is small, it has all five internal components. The F722 main control chip, onboard OSD chip, barometer, and onboard black box chip. The use of large pads ensures that the pads are kept away from components to ensure perfect soldering for beginners. SoloGood F722 Stack Input voltage: 3-6S Lipo(11v-26v max) Installing Hole: 30.5*30.5mm, M3 Support Protocols: DShot600/300 Weight: 23g     FC Specifications   Main control: STM32F722RET6 Gyroscope: ICM42688P Barometer: Support ( SPl06 ) OSD: Support (AT7456E) BEC: 10V/2A, 5V/2A UART port: 6 Black box: onboard (16M flash memory) Number of supported motors: M1-M8 Firmware name: BETAFLIGHT: SOLOGOODF722 Input voltage: 3-6S lithium battery (11-30V MAX) Output voltage: VBAT Installation hole: 30.5x30.5mm (4mm aperture) Flight control size: 38.5x38.5mm Weight: 8.1 grams LED status: blue: gyroscope status, green: 3V3 indication, red: 5Vbec indication, white: 10Vbec indication DJI/Vista: Support/6pin Electric regulation TVS protective diode: Yes External capacitor: 1000uF high-frequency low resistance capacitor (included in the packaging) ESC/Motor Protocol: DSHOT300/600 Continuous current: 60A Maximum current :65A Installation hole: 30.5x30.5mm (4mm aperture) For more info about FC, pls scan this app     Sologood BLS60A 4in1 ESC SPEC: Firmware: BLHELI-S: J-H-30-16.7 Continuous current 60A Maximum current 65A Electric dispatch protocol support: DSHOT300/600 Input voltage: 3-6s Galvanometer: Yes TVS diode protection: Yes External capacitor: 1000UF high-frequency electrolytic capacitor Installation hole position 30.5x30.5mm (4mm hole) Size: 41.5mm X42mm Weight: 15g       below is the INAV FIRMWARE