SoloGood F722 80A 8S Stack Flight Control Support 2 Cameras
Support up to 8 motor outputs to easily build X8 drones. Integrated 5V/10V dual BEC ensures stable operation Four LED status indicators display the working status under different states. Although the flight control is small, it has all five internal components. The F722 main control chip, onboard OSD chip, barometer, and onboard black box chip. The use of large pads ensures that the pads are kept away from components to ensure perfect soldering for beginners. SoloGood 6S F722 Stack Input voltage: 3-6S Lipo(11v-26v max) Installing Hole: 30.5*30.5mm, M3 Support Protocols: DShot600/300 Weight: 23g FC Specifications Main control: STM32F722RET6 Gyroscope: ICM42688P Barometer: Support (SPL-06) OSD: Support (AT7456E) BEC: 10V/2A, 5V/2A UART port: 6 Black box: onboard (16M flash memory) Number of supported motors: M1-M8 Firmware name: BETAFLIGHT: SOLOGOODF722 Input voltage: 3-6S lithium battery (11-30V MAX) Output voltage: VBAT Installation hole: 30.5x30.5mm (4mm aperture) Flight control size: 38.5x38.5mm Weight: 8.1 grams LED status: blue: gyroscope status, green: 3V3 indication, red: 5Vbec indication, white: 10Vbec indication DJI/Vista: Support/6pin Electric regulation TVS protective diode: Yes External capacitor: 1000uF high-frequency low resistance capacitor (included in the packaging) ESC/Motor Protocol: DSHOT300/600 Continuous current: 60A Maximum current :65A Installation hole: 30.5x30.5mm (4mm aperture) For more info about FC, pls scan this app SoloGood 6S F405 Stack Input voltage: 3-6S Lipo(11v-26v max) Installing Hole: 30.5*30.5mm, M3 Support Protocols: DShot600/300 Weight: 23g FC Specifications Main control: STM32F405 Gyroscope: ICM42688P Barometer: Support SPL-06 OSD: Support (AT7456E) BEC: 10V/2A, 5V/2A UART port: 6 Black box: onboard (16M flash memory) Number of supported motors: M1-M8 Firmware name: BETAFLIGHT: SOLOGOODF405 Input voltage: 3-6S lithium battery (11-30V MAX) Output voltage: VBAT Installation hole: 30.5x30.5mm (4mm aperture) Flight control size: 38.5x38.5mm Weight: 8.1 grams LED status: blue: gyroscope status, green: 3V3 indication, red: 5Vbec indication, white: 10Vbec indication DJI/Vista: Support/6pin Electric regulation TVS protective diode: Yes External capacitor: 1000uF high-frequency low resistance capacitor (included in the packaging) ESC/Motor Protocol: DSHOT300/600 Continuous current: 55A Maximum current :65A Installation hole: 30.5x30.5mm (4mm aperture) Sologood 8S 80A 4in1 ESC SPEC: BLS 8-bit ESC-80A Firmware:B_X_40_24_V0.21 Current scaling value:110 Input Voltage:3-8s Continuous current:80A Instantaneous current:90A Size:58*58.4mm Fixing hole:30.5*30.5 M4 Weight:28.4g 8S flight control spec: Main control: STM32F722RET6 Gyroscope: ICM42688P Input voltage: 3-8S Barometer: Supports (spl06) Output voltage: VBAT OSD: Support (AT7456E) Installation hole: 30.5x30.5MM BEC: bec12v/2A,5v/2A Flight control size: 38.5x38.5MM UART port: 6 Weight: Approximately 9 grams Black box: onboard (16M flash memory) DJI/Vista: Support/6-pin Number of supported motors: M1-M8