5 in 1 Dim J-BOX LED Driver 100W

This 5 in 1 dimmable drivers for led lights 12V 100W is suitable for high standard projects. Meet T24/JA8 standard. Starting time less than 0.5S. Compatible with dimmers 110V 277V. model SMT-012-100VTDHV2 SMT-024-096VTDHV2 Output DC Voltage 12V 24V Voltage Regulation ±0.5% Rated current 8.33A 4.0A Voltage Tolerance ±0.5V Load Regulation ±1% Rated power 100W 96W Input Voltage Range 100-277VAC Frequency Range 47-63Hz Power Factor(Typ.)@ full load 0.98@120VAC  0.95@277VAC THD(Typ.)@ full load <20% Efficiency(Typ.)@ full load 83% @120Vac      86%@277Vac AC Current(Max.) 1.3A@100VAC Inrush Current (Typ.) 20A, 50%, 1.6ms Leakage current <0.50mA protection Short Circuit shut down o/p voltage, re-power on to recover after fault condition is removed Over Loading ≤120% constant current limiting, auto-recovery Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling. Environment Working TEMP. -40~+60℃ (see below derating curve) Working Humidity 20~90%RH, non-condensing Storage TEMP. Humidity -40~+80℃,10~95%RH TEMP .coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes Safety&EMC Safety standards UL8750+UL1310 Withstand voltage I/P-O/P:1.88KVAC   Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH EMC EMISSION FCC Part 15 B Others Weight About 1.3Kg Size 220*94.5*40mm  (L*W*H) packing 10PCS/CTN (L*W*H) Notes 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. [Custom Product Tab] Inputwire Black and White to be connected?to?AC?L and N ,Green wire go ground, Output wireRed to LED Positive side (+) , Black ?to LED Negative side (-).?? Dimming cable DIM (+) Purpleto 0/1-10V dimmer signal(+ ),DIM (-) Grey?to 0/1-10V dimmer signal (-) ? Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged. ¡ö?Connecting Diagram Using TRIAC/Phase cut dimming 1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system. 2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers. 3.Please try to use dimmers with power at least 1.5 times as the output power of the driver. ?Using 0-10/1-10V dimming ? [/Custom Product Tab]