Sonifex RB-DA6 6-Way Stereo Distribution Amplifier

The RB-DA6 is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs. The RB-DA6 has 1 stereo input and 6 stereo outputs.It can also be configured so that 1 mono input can be distributed to 12 outputs by use of a switch which is recessed on the front panel to prevent it being accidentally knocked. The XLR-3 inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one output won’t affect the others. The left and right input gain controls (normalising) are pre-set potentiometers accessible through the front panel. The output gain may be varied from -8dB to 18dB which is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively.   Technical Specification For RB-DA6 Audio Specification Maximum Input Level: +28dBu Maximum Output Level: +28dBu Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz) Gain Range: Adjustable 8dB loss to 18dB gain (L & R adjust) Common Mode Rejection: >66dB typically Input impedance: >20kΩ bridging Output impedance: <50Ω Distortion: 0.01% THD @ 1kHz, ref +8dBu output Noise: -100dB unity gain, ref +8dBu output     Connections Inputs: 2 x XLR 3 pin female (balanced, can be unbalanced) Outputs: 12 x XLR 3 pin male (balanced, can be unbalanced) Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)Anti-surge fuse 250mA 20 x 5mm (115VAC)     Equipment Type RB-DA6: 6 way stereo distribution amplifier     Physical Specification Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)19” (W) x 4.3” (D) x 1.7” (H) (1U) Dimensions (Boxed): 58.5cm (W) x 22.5cm (D) x 7cm (H)23” (W) x 8.9” (D) x 2.8” (H) Weight: Nett: 1.3kg  Gross: 1.9kgNett: 2.9lbs Gross: 4.2lbs