Sonifex RB-DA6 6 Way Stereo Distribution Amplifier (1U)

Sonifex RB-DA6 6 Way Stereo Distribution Amplifier (1U) A high-performance 1U rack-mount 6-way stereo distribution amplifier, the RB-DA6 divides a source into many outputs. There is one stereo input and six stereo outputs on the RB-DA6. Additionally, it can be set up to distribute one mono input to twelve outputs by the use of a switch that is set back on the front panel to keep it from being knocked accidentally. It is possible to wire the XLR-3's electronically balanced inputs and outputs unbalanced. The front panel provides access to pre-set potentiometers for the left and right input gain controls (normalizing), which are designed to prevent a short circuit on one output from affecting the others. Each output is individually buffered. It is possible to adjust the output gain between -8 and 18 dB, which helps normalize professional and consumer sounds to produce outputs of 0 and -15 dBu, respectively. Specifications Audio Specification Maximum Input Level: +28dBu Maximum Output Level: +28dBu Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz) Gain Range: Adjustable 8dB loss to 18dB gain (L & R adjust) Common Mode Rejection: >66dB typically Input impedance: >20kΩ bridging Output impedance: <50Ω Distortion: 0.01% THD @ 1kHz, ref +8dBu output Noise: -100dB unity gain, ref +8dBu output     Connections Inputs: 2 x XLR 3 pin female (balanced, can be unbalanced) Outputs: 12 x XLR 3 pin male (balanced, can be unbalanced) Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)Anti-surge fuse 250mA 20 x 5mm (115VAC)     Equipment Type RB-DA6: 6 way stereo distribution amplifier     Physical Specification Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)19” (W) x 4.3” (D) x 1.7” (H) (1U) Dimensions (Boxed): 58.5cm (W) x 22.5cm (D) x 7cm (H)23” (W) x 8.9” (D) x 2.8” (H) Weight: Nett: 1.3kg  Gross: 1.9kgNett: 2.9lbs Gross: 4.2lbs