Sonifex RB-DA6P 6 Way Stereo Distribution Amplifier With Phoenix Connectors (1U)

Sonifex RB-DA6P 6 Way Stereo Distribution Amplifier With Phoenix Connectors (1U) The RB-DA6P is an audio distribution amplifier variant that replaces the XLR inputs and outputs with Neutrik Phoenix-type connectors. The matching connections are included with every device, making it easy to terminate cables using a tiny flat-blade screwdriver. Although electronically balanced, the inputs and outputs might be wired incorrectly. To ensure that a short circuit on one output doesn't influence the others, each output is independently buffered. The front panel provides access to pre-set potentiometers that adjust the left and right input gain (normalizing). It is possible to adjust the output gain between -8 and 18 dB, which helps normalize professional and consumer sounds to produce outputs of 0 and -15 dBu, respectively. Specifications Audio Specification Maximum Input Level: +28dBu Maximum Output Level: +28dBu Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz) Gain Range: Adjustable 8dB loss to 18dB gain (L & R adjust) Common Mode Rejection: >66dB typically Input impedance: >20kΩ bridging Output impedance: <50Ω Distortion: 0.01% THD @ 1kHz, ref +8dBu output Noise: -100dB unity gain, ref +8dBu output     Connections Inputs: 2 x Phoenix 3 pin (balanced, can be unbalanced) Outputs: 12 x Phoenix 3 pin (balanced, can be unbalanced) Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)Anti-surge fuse 250mA 20 x 5mm (115VAC)     Equipment Type RB-DA6P: 6 way stereo distribution amplifier with Phoenix connectors     Physical Specification Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)19” (W) x 4.3” (D) x 1.7” (H) (1U) Dimensions (Boxed): 53cm (W) x 20.5cm (D) x 6cm (H)21” (W) x 8” (D) x 2.4” (H) Weight: Nett: 1.3kg  Gross: 1.9kgNett: 2.9lbs Gross: 4.2lbs