Telex RTS SAP1626 Source Assignment Panel

Telex RTS SAP1626 Source Assignment Panel The SAP1626 Source Assignment Panel from Telex is viewed as a matrix switch capable of transforming two bus intercom systems into a 15 bus system. There are three kinds of buses in the SAP-1626. Not to mention, there are twelve primary intercom buses and three program or secondary intercom buses. There are six additional outputs intended primarily for cameras, but can be used for additional TW intercom stations or groups of stations. Lastly, the SAP-1626 fits into a standard two unit high 19" (482.6mm) equipment rack. The front panel contains thumbwheels used to accomplish matrix switching. Buses There are three kinds of buses in the SAP-1626: 1) two-way two-wire type intercom buses, 2) DC powered two-way two wire intercom buses, and 3) program audio buses. There are twelve primary intercom buses and three program or secondary intercom buses Program Buses Three program buses allow three different program sources to be connected to a SAP-1626. TW user stations can be assigned these programs on their channel two connection (bottom row of switches on the SAP-1626). If TW user stations are assigned one of the program buses with program not connected, the bus functions as an intercom bus Camera Outputs/Optional Outputs In addition to the twenty outputs discussed above, there are six additional outputs. These outputs are intended primarily for cameras, but can be used for additional TW Intercom stations or groups of stations. These six outputs are available on a twenty-five pin "D" type connector on the back of the SAP-1626 Packaging The SAP-1626 fits into a standard two unit high 19" (482.6mm) equipment rack. The front panel contains the thumbwheels used to accomplish the matrix switching Features Three (3) Kinds of Buses Twelve (12) Primary Intercom Buses Twenty (20) Outputs Six (6) Additional Outputs Fits in a Standard 2U 19" Equipment Rack Front Panel Contains Thumbwheels Light Grey Color Weighs 10 Pounds (4.5kg) Viewed as a Matrix Switch Specifications Current Maximum switch carrying current: 2.0 amps per outputMaximum switch breaking current: 0.5 amps per output Inputs Intercom: 12 lines, full-duplexLevels 2 volts p-p nominal In and out Program 3 sources, simplexInput impedance: 800 ΩInput level range: -4-8dBm Outputs User station: 20Camera: 6 Power Requirements Power is derived from the TW Intercom power supply Color Light grey enamel Dimensions 3.5 x 19 x 9.8" 88 x 484 x 249mm) Weight 10 lb. (4.5kg)