Happymodel Crux3 1S ELRS Toothpick Compatible with CaddxFPV Peanut and Insta360 GO2
shop.makerfire.com

Happymodel Crux3 1S ELRS Toothpick Compatible with CaddxFPV Peanut and Insta360 GO2

$127.22
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Makerfire

View Store

Happymodel Crux3 1S ELRS 3inch toothpick FPV Racer Drone  Note: The Caddx peanut camera is not included, you can buy it HERE   Features:40gram 1s brushless Toothpick droneAIO Flight controller with ELRS Receiver and 5.8G VTX CADDX ANT CameraNew 1202.5 KV11500 brushless motorRecommend to use 1s 450mah/650mah/660mah/720mah batteryCompatible with CaddxFPV Peanut and Insta360 GO2Carrying Caddxfpv peanut Got 4.5 minutes flying time with 1s 650mah batteryRecommended Batteries (Click the picture for the product link): Specifications：Brand Name: HappymodelItem Name: Crux3 1S ELRSWheelbase: 115mmSize: 97mmx97mmx35mm (without propellers)Weight: 40g(without battery)  Motor:Mode: EX1202.5 KV11500Configu-ration:9N12PStator Diamter:12mmStator Length:2.5mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ14mm*14.5mmWeight(g):4.4gNo.of Cells(Lipo):1S PropellersGemfan 75mmCenter Thickness:5mmProp Diameter:75mmCenter Hole diameter:1.5mmPitch: 0.9in Flight controllerMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BEC Flight controllerfirmware target: CRAZYBEEF4SX1280 Onboard 4in1 ESCMCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFactory firmware: O_H_5_REV16_7.HEXDefault protocol: DSHOT300 Onboard SPI ExpressLRS 2.4GHz ReceiverPacket Rate option: 25Hz/50Hz/150Hz/250Hz/500HzRF Frequency: 2.4GHzAntenna : SMD antennaTelemetry output Power: <12dBmReceiver protocol to flight controller:  CRSFCould bind with All ExpressLRS 2.4GHz TX module , ExpressLRS firmware need 1.0.0 or latest Onboard 5.8g VTXOutput power: 25mw~200mw switchableFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 300mA(type)Frequency: 5.8GHz 5bands 40 channelsWith Race band Smartaudio Ready Caddx ANT 1200tvl cameraImage Sensor: 1/3" CMOS SensorHorizontal Resolution: 1200 TVLTV System: NTSC or PAL IMAGE: 16:9 or 4:3Synchronization: InternalElectronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000S/N Ratio : >52dB (AGC OFF)Video Output: CVBSLens: 1.8mmMin. Illumination: 0.001Lux@F1.2Auto Gain Control: YESBLC: YESWDR: Global WDRDNR: 3D DNRDimensions: 14*14mm(with bracket to 19*19mm)Wide Power Input: DC 3.7-18VWork Temperature: -20℃~+60℃Weight: 2g (N.W.)  Package included:1x Crux3 Frame and canopy 1x ELRS F4 2G4 flight controller built-in SPI ExpressLRS 2.4G receiver 4x Happymodel EX1202.5 KV11500 brushless motor 1x Gemfan 75mm bi-blade Propellers(4cw+4ccw) 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera 1x 5.8G 25mw~200mw 40ch vtx (Flight controller built-in) 1x Screw Driver 1x Propeller disassemble tool 1x 3D Printed canopy for Insta360 GO2 and CaddxFPV Peanut 1x Happymodel Handbag

Show More Show Less