3 1/2" x 2 1/2" Rectangle Sublimatable Patch with Adhesive & Black Border

PATCHES SUBLIMATIONSupplies needed:- sublimatable substrate (patch)- sublimation transfer- teflon or scratch paper- heat tape- scratch paperHeat press settings:- temperature - 390 degrees F- dwell time - 60 seconds- pressure - mediumNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the heat press brand and model ink and paperand atmospheric conditions.2nd Note: To adhere the transfer to the substrate use heat tape notrepositionable spray. Using the spray can cause the transfer to stick to thesubstrate.Layer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. substrate (patch)3. transfer4. teflon sheet or scratch paperSteps:1. Position the patch onto the transfer.2. Tape the patch to the paper. Only tape the edges to prevent the tape fromsticking to the adhesive backing.3. Place the transfer and substrate in the press onto scratch paper or teflon(transfer on top of substrate).4. Place