1.6" x 2.75" Gloss White Unisub Aluminum Sublimatable Ribbon Keychain

UNISUB ALUMINUM KEYCHAIN SUBLIMATIONFOR SUBLIMATING ONE SIDE AT A TIMESupplies needed:- sublimatable aluminum- sublimation transfer- teflon or scratch paper- heat tape- soft paper towel (optional but recommended)Heat press settings:- temperature - 400 degrees F- dwell time - 40-45 seconds- pressure - light to mediumNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the heat press brand and model ink and paperand atmospheric conditions.2nd Note: The layers of soft paper towel achieve two goals: 1. it helps todistribute the pressure evenly throughout the substrate; 2. it helps to trapink that is dispersed outside of the edges of the substrate if there is anoverprint area or full bleed in the artwork.3rd Note: For the two-sided keychain scroll to the bottom for instructions onsublimating both sides at once.Layer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. 2-3 layers of soft paper