Dental Curing Light LED Wireless Wide Spectrum 1 Second Metal Body Built-In Light Meter 2500mW/cm²

Dental LED Curing Light Wide Spectrum 1 Second Metal Body Built-In Light Meter 800-2500 mW/cm2 . Four LED lamps. One purple LED Lamp and three blue LED lamp. High-power blue light LED. New wide-spectrum light curing, 385nm to 515nm. Effective cure for most resins on the market. Wireless charging, triple intensity model, built-in metering faction, 10mm lens diameter covering a wider dental body, lamp cap can be free 360° rotation. Overview High-power blue light LED New wide-spectrum light curing.  Effective cure for most resins on the market. Four LED lamps: One purple LED Lamp and three blue LED lamp. Wireless charging Triple intensity model Built-in light metering faction All-metal shell, made of aviation-grade metall materials, one- piece production. 10mm diameter covering a larger tooth area, truly realizing efficient curing Lamp cap can be free 360° rotation Solid metal fuselage resists falling Operation The device is not provided sterile and is not intended to be sterilized when used.  Press the S button, following four modes are available: Normal Mode: screen show P1. Press the S button to select of time which could be 5, 10, 15, 20 seconds. Pulse Mode: screen show P2. Press the S button to select of time which could be 5, 10, 15, 20 seconds. Strong Mode: screen shows P3. Press the S button to select of time which could be 1. 3, 5 seconds. During the operation, aim the top of the main unit, at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound. The curing light radiates blue light and starts working according to the set modes mean while. It starts counting down and will produce "Bi", it stops working when counting down to 0, end of work, the digital display returns to the set work mode. During operation, the blue light can be stopped by press the power button at any time. After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times. Low power detective circuit is fixed inside of the main unit when low power is detected, the display screen of main unit will wink, please charge in time. This equipment will turn off automatically if there is no any action within 2 minutes; You can turn it on by press any button. The depth of solidification of composite is no less than 4mm per 10 second. Specifications Light source: High-power blue light LED Wave length: 385nm to 515nm Light intensity:  800m W/cm2 -2500mW/cm2±10% Depth of solidification:  ≥2mm Power source:  Rechargeable Lithium battery, 3.7V/ 2200mAh Power Input:  100V to 240V.50HZ/60Hz Input Power:  10VA  Power Output:  DC5V/1A Packing List The host: 1 Disposable protective sleeve: 100 Charger:  1 Wireless charging base:  1 Shade plate:  1 The instructions:  1