Dental Curing Light LED Wide Spectrum 1 Second Metal Body Built-in Light Meter 2600mW/cm² 10W Power With Caries Detection Mode

Dental LED Curing Light Wide Spectrum 1 Second Metal Body Built-in Light Meter Max 2600mW/cm². 10W power. With Caries Detection Mode. Parallel light output. 10mm diameter. Covering a larger tooth area. 2 point curing lampes are included. 7 models. 360° rotating lamp head, easy to illuminate all angles in the mouth.  Power Supply Rechargeable Lithium battery.Standard voltage: 3.6 VCapacity: 2000 mAhBattery model: IC 18500, with protection for overvoltage, overcurrentand short-circuits Power AdapterInput: AC 100-240 V 50/60 HzFuse: T1AL 250 V.Input power: 22 VA. Output:DC 5V/1A Features of LED Light 10 Watt high power blue LED light Class: class I Wave length: 385 nm~515 nm Light intensity：900-2600mW/cm2 Checking: LED light works under proper use Radiation: ≥400 mW/cm2 Diameter of lamp holder: 10mm Optical effective area: 75 cm2 LED Curing Light is applicable to some commonly-used resin based materials in dental clinic, such as 3 M, Dentsply etc. Operating Instructions 1. Press button "M/T" for 1 second and release the button when the buzzer warns for once. Following three modes are available. (Not selectable in caries detection mode, only used for detection).Full Power Mode: The screen shows "П", The output light intensity is full-power. (recommended mode for clinical).Progressive Mode: The screen shows "Л", The output light intensity enhances gradually, power output is to maximum after 5 seconds.Pulsed Mode: The screen shows" nn", The blue light works in pulse manner. 2. Press button "M/T" for 2 second and release the button when the buzzer warns for twice. Following four modes based on output of power density are available.Ultra High Power Density: The screen shows "P1", The power density is about 2200 mW/cm2~2600m W/cm2.High Power Density: The screen shows "P2", The power density is about 1500 mW/cm2 ~ 1900 mW/cm2Standard Power Density: The screen shows "P3", The power density is about 900mW/cm2 ~1300mW/cm2Caries Detection Power Density: The screen shows "P4" and "CHECK", and the purple light is output independently. The purple light works under proper use can be regarded as normal. 3. Tap button "M/T" to select working time interval.In"P3"mode, the time interval can be chose from 1,2,3,4,5,10,15,20,25,30, 35, 40 second.In"P2"mode, the time interval can be chose from 1,2,3,4,5,10,15,20 second.In"P1 "mode, the time interval can be chose from 1,2,3, second.In"P4"mode, the time interval can not be chose. Information on the screen is shown in the figure Packing List The host:  1 Charger:  1 Charging base:  1 Shade plate: 1 The instructions:  1 Point the curing lamp holder:  2 Disposable protective sleeve: 50pcs