MS800A - Tester for diagnostics of battery hybrid and electric vehicles

The MS800А tester is designed for diagnosing high-voltage nickel-metal hydride (Ni-Mh) and lithium-ion (Li-ion) batteries in hybrid and electric vehicles. The tester provides simultaneous testing of 12 battery modules.   More info Application: The MS800A tester is used during the repair of high-voltage batteries in hybrid and electric vehicles. The tester can determine the capacity of nickel-metal hydride (Ni-Mh) and lithium-ion (Li-ion) batteries of various types: NMC, NCA, LFP. The battery module diagnostic (balancing) process occurs automatically. The tester incorporates protective systems to prevent battery module damage during diagnostics.  MS800A stores all measured data during the battery module diagnostic (balancing) process in its memory. These data can then be reviewed and analyzed on a PC using the TesterLogReader software, which you can download and use for free.   Capabilities of the tester MS800: • Diagnoses high voltage battery modules, determining their capacity. • Charges sequentially connected cells of batteries that are unbalanced over time. • Prepares the battery for installation on the car by balancing all modules by voltage. • Prepares modules for storage, charging them to a certain level.   Advantages:   • 12 independent, galvanically isolated, battery module test (balancing) channels (Ni-Mh or Li-Ion).   • Automatic operating mode.   • Battery module protection against:      - overcharging/discharge;       - overheating;      - incorrect connection (wrong polarity).   • Saving diagnostic results.   • Convenient viewing and analysis of diagnostic results.   • Management and control of the diagnostic process through a touchscreen.   • Free software update. Data sheet Supply voltage, V 230 Supply mains type Single-phase Demanded power (max.), kW 1.2 Dimensions (L x W x H), mm 640×320×225 Weight, kg 20 Operation touch control Display 9" Battery Diagnostics Number of channels for module test 12 Max. channel voltage, V for Ni-Mh 20 for Li-Ion 4.2 Charge rate, A from 0.1 up to 4.5 Discharge rate, A from 0.1 up to 5 (max. 50W per channel) Measured parameters - capacity - voltage - current - temperature Measurement accuracy: voltage current   0.02 % 0.5 % Additional features: Protection from - reverse polarity; - short circuit of the connected cable; - overheat. Diagnostics results storage yes Software update yes