Remote Control Duplicator - 4-in-1 Universal for Car, Garage Door, Gate

Are you worried that you won't remember your remote control keys and that you'll have to spend a lot of money on new ones from the manufacturer? The Remote Control Duplicator is the easiest and least expensive way to replicate any wireless remote, car key, garage door opener, and more!  In order to ensure that you always have a backup key or remote in case you miss the original, this device sends signals to copy your existing remote controls.  The device may clone up to four remote buttons from the same or other remotes, allowing you to carry four remotes in one! Each of the matching letters (A, B, C, and D) can open a different remote-controlled key.   You can open your garage door and unlock your automobile with a single remote control rather than carrying two keys.  The seamless infrared connection is safe and secure to use thanks to data encryption.  All passwords are saved independently, and any functional wireless remote key can be cloned.  It only takes a few minutes and is easy to copy.  A portable keychain's design Increased frequency      USE GUIDE  Holding two buttons (A and B, B and C, etc.) with both fingers at the same time will cause the LED to flash three times rapidly in about two seconds. To clear the code, release one finger (keeping the other finger on one of the buttons) and use the free finger to quickly click on the loose button three times until the LED light flashes. Then, release both fingers and press any key on the remote handle.  If the LED light stays on after hitting any remote control button, it indicates that the original code was not successfully deleted. If the light goes out, it indicates that the code was successfully cleared (all four keys are empty). Re-clearing is required, and cloning is only possible if the code The LED light will flash twice in around two seconds when you simultaneously press the initial buttons on two remote controls. To make a copy, hold the original remote control in your left hand and our remote control duplicator in your right. Keep the two remote controls as near together as possible. The indicator light keeps flashing and lets go of your fingers after a second. After pairing successfully, which shows that the initial key code on the original remote control has been transferred to the other remote control, you can push the key to switch on the light. The same method can also be used to activate the second, third, etc. keys.  Restore: You can simultaneously press the bottom two keys if you inadvertently wipe the remote control code copy. When you press any key, the LED lights will flash quickly and release. The remote control code has been recovered while the light is long. Before using our copy, please ensure that the current code on the remote control has been deleted.      How should one respond when certain keys are in control while the others are not?  You can do clear and restore operations; the specific procedure is as follows:  first, clear the code;  After the code has been cleared, copy the failing key again; you don't need to copy the other buttons.  after which the code is cleared once more;  The original keys that were successfully cloned are retained at this stage, while the original keys that were unsuccessfully copied are now covered by new codes. The code is then wiped once more. If there isn't a copy after the second copy, keep repeating the preceding procedures until all of the keys have been successfully replicated.