ANJIELOSMART AH WiFi HaLow Extender Long Distance Wi-Fi Outdoor AP Extender Powerful High Gain 2.4&IEEE 802.11ah Antenna Wifi Range Extender Amplifier

What is Wi-Fi HaLow?     Download Manual    AH WiFi HaLOW Extender point-to-point long-distance wireless access, 20DBi high-gain antenna, 100Mbps 2.4G WiFi Halow Extender, supports 3000 feet of outdoor transmission distance, the distance through the wall can reach 300M, Wifi penetration is stronger, to achieve mobile wifi full coverage, Easy to carry, no need to set up USB plug and play, suitable for outdoors, gardens, apartments, can transmit wifi signal to any network device, so that wifi is everywhere Notice：We provide 3 frequencies USA: 902-928MHz EU: 863-868MHz Japan: 916.5-927.5MHz. We will send the wifi Halow extender with the corresponding frequency according to the country/region where the customer orders. If you have special frequencies, please contact us 802.11 AH-WIFI HALOW frequency setting instructions Description:The Wi-Fi Halow standard network bridge works on the 902-928MHz frequency.The model is dedicated to cost-effective solutions for wireless networking applications.It is ideal for point-to-point signal coverage applications.Professional performance, coupled with user-friendly design, makes the model an ideal choice for both business and home users. Compare with the traditional  WiFi Extender or the CPE, the model is the first device with an Omnidirectional antenna for the 1Km signal transmission or strong penetration capability. Product specifications and parameters catego parameter explain wireless performance Protocol IEEE 802.11ah，（902-928MHz）IEEE 802.11b/g/n（2412-2472MHz） Communication bandwidth 8MHz data rate maximum 16Mbps Receiver sensitivity 1M PPDU MCS=10 -105dbm；8M PPDU MCS=0 -95dbm；8M PPDU MCS=7 -81dbm Number of supported network nodes Up to 8 access points transmit power 20dBm 100mW debugging method BPSK，QPSK，QAM16 or QAM64 Transmission distance The maximum distance is 1000 meters, and the non-communication distance is 300 M safety regulations WPA2-PSK Encryption AES hardware Network port 10/100Mbps power supply Type-c5V/1A LED light indication Power Indicator connection indicator Link indicator Antenna interface built-in antenna electrical properties Input voltage 5V1A Maximum current 500mA Working average power consumption 1.5W Operating temperature -20 ℃ ~ 70 ℃ storage temperature -30 ℃ ~ 80 ℃ Working humidity 10%~90% storage humidity 5%~95% size Product Size 53（diameter）x18.6（high）mm product weight 120g How to Use: 1、There are two modules for the AH WiFi Extender Set, One is called“AH Transmitter”(with network port) , another is called “AH Extender” 2、Connect AH Transmitter to the router (through LAN port) and connect it to the USB Power Adapter with the network cable. Once the AH Transmitter is power on, the POW light and RX/TX light will flash for self checking, After the self check is completed, the POW light and RX/TX light will remain on continuously 3、Put the AH Extender in a place where it needs to be connected to the Internet, Power on it when it was connected to the Power adapter with USB cable, and POW light and SYNC light will be on (if the SYNC light is not on, please adjust the position of AH Extender), in the same time SYNC light of the AH Transmitter will be on, indicating that the connection between the AH Transmitter and AH Extender has been established successfully. 4、Find the router(SSID) that named "AH-WiFi******" in your router listing, using the default password "12345678", then you can go online whether it's a phone, tablet, or WiFi 2.4g enabled computer. At the same time the LINK light of the AH-Extender is always on.