Wireless Control Vibration & Beep Tri-mode Transmitter Receiver Kit (Model 0020163)

Feature:Wireless control.You can control the receiver to vibrate with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 433MHz Receiver:Model No.: Z-063 Modes: Vibration, Beep, Vibration and BeepDecode: Learning codePower Supply: 2 x AAA 1.5V Battery (included)Size: 77mm x 38mm x 17mm Transmitter:Model No.: C-1Channel: 1 CHRemote Control Distance: 100m / 300ft (theoretically)Encode: Fixed code by solderingUnit size: 58mm x 39mm x 16mmPower Supply: 1 x 23A -12V battery (included, can be used for 12 months) Usage:Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of receiver again, switch to vibration & beep mode; press the button of receiver again, switch to vibration mode. Package Include:1 x Receiver: Z-06 (Vibration & Beep mode)1 x Transmitter: C-11 x User manual Note:If you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.