Normally Closed / Normally Open DC4~12V 1 CH Wireless Mini Receiver (Model 0020640)

Feature: Wireless control, easy to install Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with voltage AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. With characteristics of reverse power protection and over current protection Audible / visual indication Use an 8-bit microcontroller with low-power and high-speed CMOS technology. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/ several transmitters can control one/ several receivers simultaneously. If you use one or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 315MHz Receiver: Model No.: S1US-DC(4~12V) Channel: 1 CH Control Modes: Self-locking, Momentary, Interlocking Coding Type: Fixed code Coding Setting: By learning Power Supply (Operating Voltage): DC 4~12V Output: Relay output (Normally open and normally closed) Working Voltage Range of Relay: AC110~240V or DC0~28V PCB Size: 25mm x 11mm x 7mm Static Current: ≤7mA Maximum Working Current of Relay: 2A Receiver Working Current: 30mA Usage: Setting different control modes (We have set the receiver as Interlocking control mode before delivery. If you want to use other control modes, do as following operation): Setting control mode Self-locking: Do not connect Control mode Self-locking: Press -> On; Press again -> Off. Press button 1: Turn on the relay (connect B and C, disconnect A and B) Press button 1 again: Turn off the relay (disconnect B and C, connect A and B) Setting control mode Momentary: Connect terminal 1 and 2 Control mode Momentary: Press and hold -> On; Release -> Off. Press and hold button 1: Turn on the relay (connect B and C, disconnect A and B) Release button 1: Turn off the relay (disconnect B and C, connect A and B) Setting control mode Interlocking: Connect terminal 3 and 4 Control mode Interlocking: Press -> On, other relays Off; Press another button -> Off. Press button 1: Turn on the relay (connect B and C, disconnect A and B) Press button 2: Turn off the relay (disconnect B and C, connect A and B) Package Include: 1 x Receiver: S1US-DC(4~12V) (1 Channel / Two Control Modes) 1 x User manual