1CH DC9V/12V/24V RF Motor Inversion Controller Self-locking / Momentary / Interlocking Control Mode (Model 0020203)

Video: wireless remote control DC motor Feature: Wireless control, easy to install Control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC 12V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. With characteristics of reverse power protection and over current protection Audible / visual indication Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes. Transmitting Frequency: 433MHz Receiver: Model No.: S1FU-DC09 / S1FU-DC12 / S1FU-DC24 Control Modes: Self-locking, Momentary, Interlocking Coding Type: Fixed code Coding Setting: By learning Power Supply (Operating Voltage): DC12V±1V (S1FU-DC12), DC9V±1V (S1FU-DC09), DC24V±1V (S1FU-DC24) Output: DC12V (S1FU-DC12), DC9V (S1FU-DC09), DC24V (S1FU-DC24) PCB size: 67mm x 50mm x 18mm Case size: 75mm x 54mm x 27mm Static Current: ≤6mA Maximum Working Current: 10A Usage: Connect the motor to Terminal B of relay 1 and relay 2. Setting different control modes (We have set the receiver as Self-locking control mode before delivery. If you want to use other control modes, do as following operation): Setting control mode Self-locking: Only connect Jumper-2. Control mode Self-locking: Press -> Rotate; Press again -> Stop. Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －), motor rotates in the positive direction. Press button ▲ again: Terminal B of relay 1 and relay 2 no output, motor stops Press button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋), motor rotates in the reversal direction. Press button ▼ again: Terminal B of relay 1 and relay 2 no output, motor stops Setting control mode Momentary: Only connect Jumper-1. Control mode Momentary: Press and hold -> Rotate; Release -> Stop. Press and hold button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －), motor rotates in the positive direction. Release button ▲: Terminal B of relay 1 and relay 2 no output, motor stops Press and hold button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋), motor rotates in the reversal direction. Release button ▼: Terminal B of relay 1 and relay 2 no output, motor stops Setting control mode Interlocking: Do not connect Jumper-1 and Jumper-2. Control mode Interlocking: Press button ▲ and ▼ -> Rotate; Press button ■ -> Stop. Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －), motor rotates in the positive direction. Press button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋), motor rotates in the reversal direction. Press button ■: Terminal B of relay 1 and relay 2 no output, motor stops Package Include: 1 x Receiver: S1FU-DC09 / S1FU-DC12 / S1FU-DC24 (Inversion Control Mode) 1 x User manual