Polymaker PolyMide™ CoPA

These come in 750 gram spools ONLY. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.  Does PolyMide™ CoPA requires an enclosed printer? No, all our Nylon features our Warp-Free™ Technology which means it does not require a heated bed or heated chamber of more than 50˚C.PolyMide™ CoPA can be printed on a 30-40˚C bed without enclosure. Printing, Drying and Annealing Settings? Printing Temperature: 250˚C - 270˚CBed Temperature: 25˚C - 50˚CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 3mmRetraction Speed: 50mm/sIndirect Drive:Retraction Distance: 6mmRetraction Speed: 60mm/sDrying Settings: 100˚C for 6h(Only if the material has absorbed moisture)Annealing Settings: 80˚ for 6h Do you need to anneal PolyMide™ CoPA? PolyMide™ CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.You can anneal PolyMide™ CoPA by placing your part in the oven at 80˚C for 6h. Spool Dimensions?  1kg cardboard spool:Spool Inner Hole Diameter: 55±1mmSpool Diameter: 200±1mmSpool Width: 65.6±2mmSpool Weight: 140±7g