Sublimation blank wine glass sleeve / holder / cover

Sublimation Neoprene Wine Glass Sleeve  Thickness: 2.5mm Step 1: > Adjust the Heat Press Temperature: 400° F> Time:30­-35 seconds Note: These instructions, including transfer times and temperatures, are based on the inks, paper, ovens and products we use. Your inks, papers, etc. may require adjustments in your time/temp settings. Step 2:> Design and Print Your Transfers Prepare artwork and size transfer with consideration to the size of the holder,  Mirror Image: Image must always be produced in reverse to ensure right reading image once pressed into a holder. Most printers refer to this as “Flip Horizontal” or “Mirror” Step 3: Transfer the Image1. Preheat press to400° F.2.DO NOT pre­-press the sleeve! 3. Using heat resistant tape, tape the transfer image side down. 4. Place the flag on the heat press with the transfer on top. 5. Press at400° F for 30- ­35 seconds using medium to firm pressure. 6. Remove transfer while hot.   Features  Downloads