PolyScience Immersion Circulators

Overview Create a circulating bath using your own vessel with an MX Immersion Circulator, or with a PolyScience open-bath tank.  Immersion Circulators Some key specifications are in the table below, and additional features for each controller are listed below the table.   MX Immersion Circulator Working Temperature (°C) Ambient +10° to 135° Heating 1100 W Temp. Stability ±0.07°C Maximum Reservoir Capacity 28 liters Maximum Flow Rate  (L/min) 13.5 Maximum Pressure (psi) 2.30 Pump Pressure Temperature Calibration Capability 1-point Safety Rating* *DIN 12876-1 Class III devices are rated for use with flammable liquids.   MX Immersion Circulator Large, universal icon and English display On-screen prompts Single-point calibration capability For laboratory use only The MX Immersion Circulator should only be mounted to tanks with a working depth of 7.25" (18.4 cm) or more. It clamps securely to both straight and curved tank walls Key Attributes Type Stirred / Circulating Baths Incubation Yes Refrigeration No Temp Range (°C) A +10 to 135 Capacity (L) N/A Circulation Internal Only Brand PolyScience MaxFlow Rate (l/min) 6, 13.5 Temp Stability (°C) ±0.07 Timer No Alarms Yes Digital or Mechanical Digital Data connection No Tank Material N/A Sample Agitation No Media Racks Available No Warranty (years) 2 Weight (lb) 10 Width (in) 6.5 Depth (in) 3.75 Height (in) 14 Manufacturer Specifications MX Immersion Circulator  Working Temperature Range °C Ambient +10° to 135° Temperature Stability °C ±0.07° Reservoir Capacity (liters) 28 Reservoir/Tank Material N/A Display 3.25" LCD Display Resolution (Set) 0.01 Display Resolution (Read) 0.001 Pump Type Pressure Pump Speed One Flammability Class (DIN 12876-1) I (NFL) Maximum Ambient Temperature °C 35° Overall Dimensions (L x W x H) (inches) 4.3 x 3.8 x 14.1 Shipping Weight (pounds) 10 Maximum Pressure (psi) 2.3 Maximum Pressure Flow Rate (l/min) 13.5 Heater Wattage 1100 Electrical Requirements (VAC/Hz/Ph/A) 120/60/1/10 Regulatory Approvals ETL FAQ I would like to perform a heating / cooling program where the temperature ramps from one set point to another over time. Are the PolyScience Immersion Circulators capable of this? No, they are not. For that, you will need one of the PolyScience circulating baths with an Advanced Programmable or Performance Programmable controller. Can I use the PolyScience Immersion Circulator with only the heat on (no circulation)? No. If the heat is on, the circulation must also be on.