VTSYIQI Digital Ultrasonic Flaw Detector Weld Testing Equipment with Dynamic Range ≥32dB Frequency Range 0.2-20MHz Material Velocity 1000-15000m/s 500 A Graph Data Storage 500 Channels IP65 Standard

VTSYIQI Digital Ultrasonic Flaw Detector Weld Testing Equipment with Dynamic Range ≥32dB Frequency Range 0.2-20MHz Material Velocity 1000-15000m/s 500 A Graph Data Storage 500 Channels IP65 Standard Introduction: Digital ultrasonic flaw detector is advanced type,, can quickly, easily and without damage, accurately detect, locate, evaluate and diagnose various defects inside the work-piece such as cracks, welds, pores, sand holes, inclusions, folding, etc.  It has been applied for electric power, petrochemical, boiler and pressure vessel, steel structure, military, aerospace, railway transportation, automobile, machinery and other fields. It is an essential instrument for the non-destructive. Measurement display mode: positive wave,negative wave, full wave and wave ; It has a linear suppression function, the maximum inhibition is 80% of the screen height; It can switch between single crystal probe, double crystal probe and two inspection modes; It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set. 500 independent detection channels, each channel set a separate set of testing parameters, DAC curve; Two display modes with angle and K value; The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves; AVG curve is generated automatically, and two types of defects can be customized; Automatic probe calibration function. With storage function, it can store 100 A sweep patterns, parameters and DAC curve; Has a storage graphics playback function, the stored A-scan graphics from the storage area and displayed on the screen; Has a delete function to delete the specified content (represented by the storage group number) from the storage area; Peak memory function. Freeze and thaw functions with waveform and inspection parameters; With sound path measurement and echo frequency analysis function; Real-time power status indication function; Support USB communication interface; Li-battery, low power consumption, can continuous working more than ten hours Can set up buzzer alarm during operation Light, convenient, easy to operate Specification: Measuring Range (mm): 0 ~10000mm  Channels: 500  Frequency Range (MHz)：0.2 ~20MHz  Material Velocity (m/s): 1000 ~15000m/s  Vertical Linearity Error: ≤3%  Horizontal Linearity Error: ≤0.1%  Dynamic range: ≥32dB Features: Automated calibration、Automated gain DAC、AVG、TCG、B scan、AWS High-speed capture and very low noise High contrast viewing of the waveform from bright Powerful pc software and reports can be export to excel Functions: Automated display precise flaw location(Depth d、level p、distance s、amplitude、sz dB、ф); Automated switch three staff gauge ((Depth d、level p、distance s); Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity; Convenient to make and use DAC、TCG and AVG to evaluate the echo, the curve can be modified and compensated 6dB DAC functions; 500 independence setup, any criterion can be input freely, we can work in the scene without test block; Big memory of 500 A graph; Automated gain and gain scan; Peak Hold and Peak Memory; B scan; AWS D1.1 Automated make video of test process and play; use upan,the length of video is unlimited. Powerful pc software and reports can be export to excel; *Li battery, continue working time up to 12 hours; Other Assistant Function: Display freeze; Automated echo degree; Angles and K-value; Lock and unlock function of system parameters; Electronic clock calendar ; Two gates setting and alarm indication; Gate and DAC alarm; Specifications: Measuring Range (mm):0 ~10000mm Channels: 500 Frequency Range (MHz)：0.2~20MHz Material Velocity (m/s): 1000 ~15000m/s Vertical Linearity Error: ≤3% Horizontal Linearity Error: ≤0.1% Sensitivity Leavings: ≥62dB Dynamic range: ≥32dB Resolving Power: ≥36dB Gain (dB): 0 ~120dB Measurement Mode: Single、Dual、Thru Reject: 0~80% Pulse Displacement (μs): -20 ~+3400 Zero (μs): 0.0 ~99.99 Port Type: BNC(Q9) or Lemo 01(C9) Operating Temperature (℃): -20~70 H*W*D(mm): 240*156*48 Technical Specification: Scan range (mm):0~10000 Grades: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,7000,8000,9000, 10000. Adjusting step distance: 1mm Pulse shift ( ms ): -7to +9984 Grades: -20, -10, 0.0, 10, 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,700,800,900,100,015,000,000,000,000,000,000.00 Adjustment step:1（-7ms~9984ms） Probe zero point：0.0~99.99 Adjust the step：0.01 Material sound speed(m/s): Material sound speed:1000~15000 7 fixed sound speeds:2260,2730,3080,3230,4700,5900,6300 Flaw detection sensitivity margin:³62dB Dynamic Range:³32dB Alarm:Incoming wave alarm Display screen:Display High-brightness color 5.7 in display A-Scan display area: Full screen or local; A-Scan shows freeze and thaw A-Scan fills Flaw detection channel:300 Data storage:500 A-Scan graphics PC communication interface standard:USB Units of measurement:Mm Power Adapter: enter 100V~240V/50Hz~60Hz; Output 9V/1.5A Battery:Lithium (Li) Battery 5000mAh Working temperature (°C):-10~50°C Working humidity (RH):20%~90% Interface Type:BNC Dimensions (mm):220*140*50 Weight(kg):1 Standard Configration: Main Body 1 Straight Beam Probe 1 Angle Probe 1 Machine-probe Cable 1 Power Adapter (Charger) 1 Data proceeding Software 1 USB communication Cable 1 Manual 1 Instrument Case 1 Packing List 1