Sublimation sequined pillow cases

Sublimation sequined pillow cases 16x16 in size. Make sure to pull all sequins to one directional side away from color until after subbing  Supplies needed:- sublimatable substrate (pillow wrap)- sublimation transfer- teflon or scratch paper- repositionable sprayHeat press settings:- temperature - 380 degrees F- dwell time - 1:10 minute- pressure - medium/heavyNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the heat press brand and model ink and paperand atmospheric conditions.2nd Note: To adhere to the transfer to the substrate use repositionable sprayon the transfer instead.Layer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. substrate3. transferSteps:1. Spray the transfer with repositionable spray.2. Position the substrate onto the transfer.3. Place the transfer and substrate in the press (transfer on top ofsubstrate).4. Place the teflon sheet or scratch paper over the substrate and transfer.5. Press the items using the settings listed above.6. Remove the transfer from the substrate and items from the pressimmediately. Use heat-resistant gloves if necessary - the items will be veryhot.Tips:- If the image of the final product appears light increase the pressure orthe dwell time slightly (10-20 seconds).- If the image on the final product appears blurred or substrate appearsyellowed reduce the dwell time slightly (10-20 seconds).