Epoch 12V 300Ah Pro Series - LiFePO4 Cranking & Deep Cycle Lithium Battery (Dual Purpose)
LiFePO4 Chemistry Peak Discharge of 1,000A @ 5s, 800A @ 10s Max Charge Current of 300A (Continuous) Max Discharge Current of 300A (Continuous) Victron Comms - CANBUS entire string of batteries to Victron Ecosystem HEATED - Internal heating allows for charging in sub-zero conditions BLUETOOTH - iOS and Android Apps BLUETOOTH - Over the air Firmware update via the app External Battery Gauge - Touch Screen (Optional - Coming soon) Communications Box for more Inverter, NMEA2k compatibility (Optional - Coming soon) IP67 Rated, Dust and WATERPROOF Over current and short circuit protection High & low temperature disconnects Max (4) in Series up to 48V Max (16) in Parallel 6000+ Cycle life & Maintenance-free 11 Year Manufacturer Warranty SPECS Configuration Cell Configuration: 4S3P Chemistry: LiFePO4 Current Ah Capacity: 300Ah Max Continuous Discharge Amps: 300A Max Charge Current Amps: 300A Max Discharge Peak Current Amps: 1,000A @ 5s Series | Parallel: Max (4) in Series, Max (16) in Parallel Voltage Voltage: 12.8V Max Charge Voltage: 15.4V Operating Voltage Range: 10.0 - 15.4V Temperature Charge Temp Range: -20°C (-4°F) / 55°C (131°F) (with heating) Discharge Temp Range: -20°C (-4°F) / 60°C (140°F) Storage Temp: 0°C (32°F) / 35°C (95°F) Weight: 81 lbs Length: 19.70 (inches) Width: 10.5 (inches) Height: 9.75 (inches) Magnuson-Moss Warranty Act: A vehicle manufacturer cannot legally void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)). Epoch Batteries have proprietary software embedded in the Battery Management Systems that make them 100% compatible with Mercury 250 hp motors and other leading brands. To properly charge your Epoch Batteries, you will want to verify that any charging component in your system is capable of being programmed for the following specifications. Charging components can include, but are not limited to converters, inverter chargers, solar charge controllers, DC to DC chargers, etc. Bulk/Absorption: 14.2V – 14.6V Absorption Time: Two batteries in parallel connections require 30 minutes 200Ah Float: 13.4V – 13.8V Equalization: 14.4V/ Disabled Temperature Compensation: 0/Disabled Charge Rate: 50% of the battery or battery bank capacity Battery Charge Temperature Range: 32°F (0°C) to 131°F (55°C) Battery Discharge Temperature Range: -4°F (-20°C) to 140°F (60°C) Cell Charge Temperature: 32°F (0°C) to 131°F (55°C) NOTE: Not all chargers are capable of multistage charging. If yours is not, you will want to verify it can be programmed for the Bulk/Absorption voltage and have the other items mentioned disabled if applicable. Consult your charger's manual or the manufacturer. IP67 Experience worry-free adventures with our robust IP67 protection. Your battery is completely sealed against dust and can be safely immersed in water up to 1 meter deep for 30 minutes. Whether you're caught in heavy rain or crossing streams, this military-grade protection ensures your power stays reliable. Fully Dustproof Waterproof up to 1m All-Weather Protection Submersible Design