Norton - 6021 - Low Energy Door Operator - Push Side - Double Lever Arm - Aluminum

The 6000 Series low energy operator is a heavy-duty unit designed for rigorous, high-use applications. Built-in intelligence enables the operator to safeguard users while providing better door control. Simple installation and adjustment features combined with the unit’s high level of versatility allows for seamless integration with a multitude of facilities and systems.Features Adjustable Hold Open - Amount of time a door will stay in the full open position after an activation Blow open for smoke ventilation - Door opens when signal is received from alarm system allowing air or smoke to flow through opening. Door will stay open until signal from alarm system is stopped Infinite Hold Open - Door will hold open at set position until power is turned off Obstruction Detection - Open: door closes if it hits an obstruction while opening. Close: door reopens (once) if it hits an obstruction while closing. If it hits the obstruction again, the door will rest against the obstruction until it is removed Open Delay - Delays operator opening for locking hardware Overload Safety Shut-Off - After 3 minutes of receiving a door activation signal, inverter times out and door closes - Prevents motor/inverter damage Presence Detector Input - Input for external sensor to detect presence at door open or close position only Push & Go - As the door is manually opened, the operator "senses" movement and opens door to the full-open position Selector mode switch - Off: Disables signal inputs unless Blow Open is activated. On: Activates signal inputs. Hold Open: Activates the unit (unless blow closed is activated on 6300) to the hold open position Two Selectable Output relay - Multi-function relay outputs Vestibule Delay - When the push button is pressed, first door in vestibule will open. Second door will open once vestibule door delay has expired. Delay is adjustable ANSI/BHMA A156.19 certified & ADA Compliant Specifications Construction Heavy-Duty cast-aluminum body Function Hydraulic Electronic Door Operator Interior or Exterior Both Handing Non-Handed Power Input 120 VAC, 60Hz Power Supply 24 VDC (1.3A) Finish 689 - Aluminum Maximum Door Weight 250lbs Door Width 36" - 48" Housing Projection 4-3/4" Housing Height 5-3/16" Housing Length 37-1/2" Mounting Style Push Side Max. Door Opening 110 Degrees Certifications » ANSI/BHMA A156.19 certified» ETL tested to UL / cUL standards for automatic doors used on fire and smoke barrier doors and CSA C22.2 No. 247 for operators and systems of doors» UL10C listed for positive pressure fire test» Comply with requirements for the Americans with Disabilities Act (A.D.A)» California State Fire Marshall Listing 3266- 0944:0110» Manufactured in an ISO 9001 and ISO 14001 facility» Verified by Green Circle to offer the following energy savings as compared to similar products:» 19% efficiency» Health product declaration and UL certified environmental product declaration Warranty 2-Year Limited Warranty Downloads Data Sheet Installation Guide