Godiag - SK348 - Test Platform - BMW FEM/BDC Programming Works With VVDI2 VVDI BMW Key Tool Plus

Please Note: This item is a pre-order and will be available soon This is a Godiag FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers, and FEM / BDC programming engineers. Godiag FEM test platform can program new keys when all keys lost, can add a new keys to the BMW FEM BDC vehicle on bench. Supports working with tools from Lonsdor, Autel, Launch, X-Horse, CCGDI, and Foxwell. Tools such as the; Xhorse VVDI2/VVDI key tool plus pad Autel IM608 CDGI BMW Features: Provide locksmiths with an easy and convenient connection for FEM/BDC immobilizer system. Perform the synchronization test for the programmed FEM / BDC and the key. Provide a test environment for the engineers who professionally recycle FEM/BDC. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly. Provide professional engineers with connecting FEM BDC modules and instruments. By working together with Godiag GT100 & Xhorse VVDI2 / BMW VVDI BIM tool / Autel IM608 etc, the Godiag FEM / BDC test platform can program new keys, can add new keys and replace FEM / BDC ECU modules.  Allowed to connect this platform to the FEM / BDC module to test whether it can communicate or if there is any malfunction.  Used to read out & backup the data after preprocessing, used to replace FEM / BDC immobilizer module Before installing the FEM / BDC module back to the car, it can be used to test whether the programmed key synchronizes with FEM / BDC The test platform can be used for troubleshooting when the key cannot start the car by pinpointing whether it is caused by the mismatch between FEM/BDC and the key. DB25 female connector (used to connect the DB25 male port of Godiag GT100) Ignition simulated start swtich Immobilizer dashboard simulated indicator  Key sensing area Screw bolt CON7  Source connection port Appearance CON8