GALDEN® D02 TS

Galden D02 TS PFPE Electronic Reliability Testing Fluid  Galden D02 PFPE grades are specifically recommended for electronic reliability testing, including thermal shock and hermetic seal testing. Galden PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service temperature ranges, are available. Uses include heat transfer, electronic reliability testing, vapor phase soldering, solvents, and acid spill mitigation. Ideal fluids for applications with component immersion, wafer etching, ion implantation, radar equipment, transformers, power supplies, UF6 production, chillers, cooling towers, and freeze dryers. Features of Galden D02 PFPE electronic reliability testing fluid Fluids contain nine coolants with boiling points between 70°C and 270°C Perfluorinated, inert polyethers have a high resistance to oxidation and thermal degradation Compatible with metals, ceramics, plastics, and elastomers Fluids have low viscosity, no hydrogen in the molecular structure, and low water absorption Excellent for use in direct immersion cooling and indirect cooling applications Nonflammable, nontoxic, and safe for the environment Benefits of Galden D02 PFPE electronic reliability testing fluid Environmentally safe-do not damage the ozone Highly inert Good heat transfer medium Chemically and thermally resistant Nontoxic Physical Properties of Single Fluids D02 TS Normal boiling point 165°C Pour point -97°C Density, 25°C 1.77 g/cm3 Density, -54°C 1.95 g/cm3 Kinematic viscosity, 25°C 1.7 cSt Kinematic viscosity, -54°C 45 cSt Specific heat, 25°C 973 J/Kg°C Thermal conductivity, 25°C 0.07 W/m°C Coefficient of expansion 0.0011 cm3/cm3°C Surface tension 16 dyne/cm Dielectric strength 40 kV (2.54 mm gap) Dielectric constant 2.1 Volume resistivity 5*1015 Ohm-cm Average molecular weight 750 a.m.u.