Supermicro Motherboard MBD-X11SCM-LN8F-O Core i3 S1151 C246 128GB DDR4 PCIE SATA mATX Retail
MPNMBD-X11SCM-LN8F-OPhysical Stats Form Factor microATXProcessor/Cache CPU 8th/9th Generation Intel Corei3/Pentium/Celeron Processor, Intel Xeon E-2100 Processor, Intel Xeon E-2200 Processor. Single Socket LGA-1151 (Socket H4) supported, CPU TDP support Up to 95W TDP Cores / Cache 8 cores, 16 threads Note BIOS version 1.0b or above is required to support Intel Xeon E-2200 and 9th Generation Intel Core i3/Pentium/Celeron Processors System Memory Memory Capacity Up to 128GB Unbuffered ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots Memory Type 2666/2400/2133MHz ECC DDR4 SDRAM 72-bit DIMM Sizes 4GB, 8GB, 16GB, 32GB Memory Voltage 1.2V Error Detection Corrects single-bit errorsOn-Board Devices Chipset Intel C246 SATA Intel C246 controller for 6 SATA3 (6 Gbps) ports RAID 0,1,5,10IPMI ASPEED AST2500Network Controllers 8 LAN with Intel Ethernet Controller I210-AT Graphics Aspeed AST2500 BMCInput / Output SATA 6 SATA3 (6Gbps) port LAN 8 RJ45 Gigabit Ethernet LAN ports USB 4 USB 2.0 ports (2 rear + 2 via headers) 5 USB 3.1 Gen1 ports(2 rears, 2 via headers, 1 Type A) Video Output 1 VGA portSerial Port / Header 1 COM Port (1 header) TPM 1 TPM HeaderExpansion Slots PCI-E 1 PCI-E 3.0 x16 M.2 M.2 Interface: 1 SATA/PCI-E 3.0 x4 and 1 PCI-E 3.0 x4 Form Factor: 2280/22110 Key: M-Key Double Height ConnectorSystem BIOS BIOS Type UEFI 256Mb BIOS Features ACPI 6.0SMBIOS 2.7Plug and Play (PnP) RTC (Real Time Clock) WakeupUEFI 2.7USB Keyboard supportPCI 3.0 Management Software Intel Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog System Mangement Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support Power Configurations ACPI Power ManagementPC Health Monitoring Voltage +12V, +3.3V, +5V, +5V standby, 6 -fan status, Chassis intrusion header, Chipset Voltage, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, VBAT FAN 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI LED UID/Remote UID, CPU / System Overheat LED Other Features ACPI power management, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, Node Manager Support, UID, WOL Operating Environment Operating Temperature Range 0oC 50oC (32oF 122oF) Non-Operating Temperature Range -40oC 70oC (-40oF 158oF) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)