4ms Row Power 45 (black)

Row Power is a clean, regulated, and protected power solution for Eurorack systems. Row Power 45 provides enough power for two to three typical Eurorack rows (typically up to about 312HP): +12V @ 2.0A maximum, 1.5A recommended -12V @ 1.4A maximum, 1.2A recommended +5V @ 1.5A maximum, 1.2A recommended Simply plug a universal power supply (laptop style) like the 4ms 90W power brick into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick. For custom power systems, the Row Power 45 has a set of easily soldered holes for using large gauge wire or MTA156 connectors to connect to distribution bus boards. Multiple Row Power modules can be powered from a single power brick by daisy-chaining with an inexpensive barrel cable. The Row Power 45 can also be daisy-chained to 4ms Company's Pod enclosures. Each power supply is independently regulated and protected for ultra-low cross-talk between rows/pods. Basic Features: Two power jacks for daisy-chaining multiple Row Power units: a common laptop-style power brick could typically run 3-5 rows or Pods On/off switch cuts power without interrupting the daisy-chain Row Power 45 provides more than enough power for three typical rows of modules. Ultra-clean: Each rail is separately regulated with high-grade components Runs cool: Row Power 45 is efficient so it won't heat up your system. Skiff-friendly: only 27mm (1.01") with power connectors installed. CV/Gate headers for expansion Solder holes for DIY/custom power distribution boards: fits MTA156 headers or 14 AWG wire Electrical and Mechanical Specifications: Module Size: 4 HP Eurorack format module Power Output: Maximum average load under normal conditions: +12V @ 2.0A, -12V @ 1.4A, +5V @ 1.5A Maximum average load under any condition: +12V @ 1.5A, -12V @ 1.2A, +5V @ 1.2A Powered by laptop-style DC power supply: 2.1mm barrel, positive center, 15V-20V. Included with the Row Power 45: 2 M3 Knurlie screws *The Noise Source is an authorized 4ms dealer*