VPI PLAYER TURNTABLE

VPI PLAYER TURNTABLE This is how to get into vinyl with one package, but not sacrifice quality. The VPI Player is an all-in-one, high-end, entry-level turntable, with a built-in phonostage, pre-mounted Ortofon 2M Red cartridge, and a headphone amplifier. Standard RCA line-outs on the back mean you can connect to any amp or to powered speakers.  Features Table ·      1.25’’ thick textured vinyl-covered non-resonant MDF       chassis ·      16’’ x 11’’footprint ·      19” x 14” x 6” overall size ·      Aluminium Platter ·      Platter rotates on an oil bath bearing and fitted to       shaft with a #2 Jacob’s Taper for a concentric rigidly       mounted coupling ·      The bearing has a PEEK thrust disc and machined       graphite impregnated brass bushings using a       Thompson Engineering 60 Rockwell case hardened       shaft ​Tonearm: ·      New 9” vertical Yoke type tonearm with lateral       turntable type bearing ·      Pivot to spindle: 223mm ·      Effective length: 240.7mm ·      Overhang: 17.7mm ·      Offset angle: 22.85 degrees ·      Average RMS distortion: .36% ·      VTA adjustable arm mount. ·      Damped stainless steel armtube. ·      Very pure copper wire, twisted with special insulating       jacket ·      The armbase is upgradeable to a standard JMW 9 arm ​Specifications Type: Belt drive (manual turntable) Motor: 24 V synchronous AC motor Turntable platter: Aluminum Diameter: 11.81” (30.0 cm) Turntable speeds:         33.3 RPM and 45 RPM Cartridge: Ortofon 2M Red Output: 5 mV @ 1 KHz Tracking force: 1.5 g (recommended) Input load: 47 kOhm Dimensions (WDH): 18.5” x 13.5” x 4.3” Weight: 12.9 lb (5.9 kg)