1994-2002 Chevrolet S10 Rear Window Kit Clear Lexan

Made in USA with the Highest Quality Craftsmanship Clear 1/8″ thick Window cut to fit Includes (2) aluminum back bar seal plates and hardware. The window is cut to  (56″ widest point, 16″ tallest point) and shouldn’t require much trimming. Customer required to cut back slots and drill mounting holes. Installation Instructions If the window has a paper coating on it, do not remove it until you are ready for the final installation. Note; extended exposure to sun light may make removal of the paper difficult. 2. Park the truck so that the bottom edge of rear window is level. 3. Find the center of rear window along bottom edge; mark this point on the body. Using a square or level transfer this point to the top of the window opening. 4. Locate the slots for the roll cage back braces. Using a square or level mark the location of the inside and out side of both back bars on the body along the bottom edge of the window opening. Measure up from the bottom of the window opening to the bottom