SubiSpeed USDM F1 Style Rear Fog Light - Red Lens - 2015-2021 Subaru WRX / STI

With a little work, SubiSpeed was able to take part in the development of a USDM F1 style rear fog lamp for the 2015 WRX / WRX STI. This is the first complete lamp assembly for the 2015 WRX / STI that SubiSpeed is offering. With a little work, we were able to develop a USDM F1 style rear fog lamp for this platform. It is produced in the same factory that the JDM version is manufactured, however it is built to our USDM specifications. Since US vehicles lacked the rear fog light from the factory, they require additional wiring and mounting brackets vs JDM vehicles. The brake function blinks quickly before becoming solid. This is what gives the lamp it's "F1 Style" name. SubiSpeed Install Video Models All LEDs are red. Smoked - Smoked lens with matte black reflector Chrome - Clear lens with chrome reflector Red - Clear lens with cherry red reflector Setup There are a few ways this light can be setup: F1 Style Brake Light Only Rear Fog Light Only F1 Style Brake Light + Rear Fog Light Important: For our USDM model the brake light function IS brighter than the fog light function in this model. This makes it clear to other drivers whether or not you are braking or not. Preview Video This video does not reflect the improvements made to the USDM lamp once it went into full production as mentioned above. OPTIONAL Fog Light Wiring Splitter / Extension If you want to wire this so that it only comes on with the fog lights you'll find yourself using a pretty long run of wire. We've made a quick connect kit which will split the wires to the passenger side fog light. Just run the wire under the driver's side fender liner, into the vehicle, and along the door sills back to the trunk of the vehicle. The insulated connectors will be placed on the F1 light harness and extension. Just connect them together and you'll have a functioning rear fog light. Includes splitter and extension with two pairs of connectors. The plug for the female end is not pre-attached so that the wires can easily be run through grommets in the firewall area. Includes F1 Style Fog Light Assembly Mounting Hardware Wiring Harness with Connectors Fog Light Wiring Splitter / Extension (optional) FAQ Does installation require removal of the bumper cover? The bumper cover does not need to be removed in order to install this product. Simply undo the fasteners at the bottom of the bumper cover so you can gain enough access to knock out the factory plastic cap. We highly recommend covering the lens of the new fog light casing with painter's tape or something similar during installation. This will prevent scratches while you maneuver it into position. Which wires would I plug it into? Our video will help your through the installation process. However, for reference, the OEM tail light wiring is as follows: Black Wire - Negative aka Ground (wire to black on the new harness) Black Wire w/ White Stripe - Fog Light Positive (wire to red on the new harness) Brown Wire - Brake Light Positive (wire to yellow on the new harness) If you use the fog light extension harness, the negative and fog light wires will be supplied by that harness. You will only use the OEM tail light harness for the brown wire (brake light positive). You can wire the lamp as a solid brake light only. You would do this by connecting the fog light wire (red) on the lamp to the brown wire on the OEM brake light wire (brown). It would be dimmer than the F1 style lamp though. Is a flashing brake light allowed? While many states allow brake lights that flash and then turn solid, some do not. Please refer to your local laws pertaining to this feature. It is not required that you hook up the brake light wiring. You can run the product as a rear fog light only.