P12 Bulb Touch Boxlight UST Interactive Projector

With MimioProjector™Touch projector, you can connect with your computer and use the conventional dry erase boards you already have.  Touch-enabled collaboration with the computers and whiteboards you already own. An affordable way to bring multi-touch, interactive collaborative learning into classrooms that don’t have projectors. Create an interactive touch area as large as 100 in. diagonal. Allows up to 10 single-point touches or 5 dual-points touches with gestures. A full-featured solution that includes award-winning MimioStudio™ classroom software. The MimioProjector gives you a chance to bring interactive teaching into your classrooms without having to buy both an interactive whiteboard (MimioTeach or MimioBoard) AND a projector. Creating an interactive classroom with the computers and whiteboards you already have is easy: Just mount, plug in your computer and your lessons can be brought to life with graphics and images on your conventional dry erase board. Enhance collaborative learning with dual-pen operation—allowing two students to interact simultaneously with the same projected lesson. Reduce shadows on the whiteboard with this ultra-short-throw projector. Award-winning MimioStudio™ classroom software is included to give you a full-featured solution. Using other MimioClassroom™ products is easy since they're all completely integrated with each other. Features A true HDMI experience, which means stunning images and audio – no need for separate speakers. Using pens or finger touch, multiple students can simultaneously interact with the same projected image, enhancing collaborative learning. Ultra-short-throw design reduces shadows on the whiteboard. Laser Curtain Module powers directly from the projector – no extra wires or complicated installation. Easy alignment – takes less than a minute with the Visible Light Alignment feature. Bulb can be replaced without dismounting the MimioProjector device. Up to 5000 hours between bulb replacements. More Features Supports all common video formats, including VGA, HDMI, S-Video, and Composite. High image quality up to WXGA. Ultra-short-throw design reduces shadows on the whiteboard. Technology supports 3D displays. Optional Wall Mount enables MimioProjector interactive projector to be attached to a wall. Includes Kensington lock for additional security. Built-in stereo speakers provide a more lifelike experience without additional components. Built-in line input for PC output and Mic input for use with a microphone.   Minimum Software RequirementsMimioStudio 10 and higher on a Windows, Mac, or Linux OS. Dual-pen operation is compatible with Windows 7 and above. Single-pen operation is available for Mac, Linux, Windows XP and Vista. For specific system requirements,please visit the MimioStudio product page.  Projector Specifications Native Aspect Ratio: 16:10. Also supports 4:3 and 16:9 aspect ratios. Native Resolution: 1280 x 800 (WXGA) Image Size (projected distance): WXGA 16:10: 70” – 100” Keystone Correction: Vertical: ±15 degrees (manual) Contrast Ratio: Up to 3000:1 Typical 2000 : 1 (Native) (White @100% lamp power/Black @100% lamp power) Color Reproduction: 1.07 billion colors (R/G/B 10 bit) Color temperature: Adjustable from 6500° K - 8300° K Color uniformity: |△x| <0.03, |△y|<0.03 Projection Lens F 2.6 fixed zoom Focal Length: 3.71 mm Throw Ratio Range: WXGA 0.35 Zoom Ratio: Digital zoom 1.0 – 2.0X Focus type: Manual Video Projection System: Digital Light Processing (DLP), utilizing a six-segment color wheel Projection Method: Front / Wall Mount Brightness: 2800 lumens Lamp: 240 Watt OSRAM E20.8 Lamp (replaceable without dismounting projector) Lamp life: Normal mode: 3500 hours minimum. Eco mode: 5000 hours minimum. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Lamp brightness decreases over time. Input Signal: NTSC/PAL/SECAM video capability with S-video / composite / YPbPr Component 1080p/UXGA/WXGA/XGA/SVGA/MAC compatibility Video Inputs: 1 HDMI, 2 VGA, 1 S-video, 1 composite analog Closed captioning: on TI DDP4421 spec, CC1/CC2/CC3/CC4 supported 3D capabilities DLP Link 3D and HDMI 1.4a 3D supported Audio Two 3.5-mm stereo line level, 2 stereo RCA jack line level, one 3.5-mm audio out, one 3.5-mm microphone Input sensitivity: 1 kHz, 0.5Vrms sine wave Speaker: 8 watts stereo (16 watts total output) Environmental Operating Temperature: 0-40° C (32-104° F) Altitude: For 0 - 762 M, 0 - 40° C (0 - 2500 ft, 32 - 104° F); for 762 - 1,524 M, 0 - 35° C (2500 - 5000 ft., 32- 95° F); for 1,524 - 3,048 M, 0 - 30° C (5000 - 10000 ft, 32 - 86° F) Humidity: Operating and Storage: 80% RH (Max.), Non-condensing Fan Noise: Full mode: 35±2dB(A), w/o filter ECO mode: 30±2dB(A), w/o filter Power Power Supply Voltage: Universal AC 100 – 240 V~50-60 Hz with PFC input Power Consumption: Normal mode: 300 W+/-10%@110VAC ECO mode: 240 W+/- 10% @110VAC Standby< 0.5W Security Kensington lock »36 Kg Interactivity (optional feature) Interactive Technology: 940 nm Infrared digital pen Detection Frame Rate: 60 fields-per-second providing 16.6 ms response time Resolution: 2560 x 1920 (interpolated); 640 x 480 (Native) Interactive Area: 75” to 115” diagonal Multi-pen: one or two pens provided with Interactive version of MimioProjector, depending on configuration. Non-interactive versions of MimioProjector do not include a pen. Pen uses alkaline AAA battery. Interactive Connectivity: mini-USB cable required Interactive Device: Digital pen Pen attributes: 15.2 cm L x 1.5 cm W (6.0 in. L x 0.6 in. W), 34 g (1.2 oz) (without battery) Dimensions and Weight: 357 mm W x 367 mm D x 135 mm H (14 in. W x 14.4 in. D x 5.3 in. H) (excluding feet) 357 mm W x 367 mm D x 231 mm H (14 in. W x 14.4 in. D x 9.0 in. H) (including reflection mirror) Weight: 7.5 kg (16.5 lb) Notes Color brightness (color light output) and white brightness (white light output) will vary depending on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output measured in accordance with ISO 21118.