Suitable for DJI Mini 3Pro Buoyancy Bar Set Foldable Flight Booster
Material: plastic/plasticProduct Category: HelicopterSpecifications: mini3pro buoyancy barWhether static model: noControl method: noneWhether electric: no3C configuration category: toys over 14 years oldApplicable age: youth (15-35 years old)Product name MINI 3 PRO (Increasing tripod + buoyancy bar set)Product size 22.3x20x8.9 cmApplicable models DJI MINI 3 ProFoldable design for portable storageThe height-enhancing stand is made of high-quality plastic material and can be foldedSturdy and wear-resistant, but also easy to carry and store when going out Before After The tripod effectively increases the height by 5.3cmThe height of the tripod is increased by 5.3cm, which effectively protects the visual and infrared obstacle avoidance system below.Expandable buoyancy barSophisticated design and careful use of O-ring mounting and fixing to the booster standEasy installation and quick disassemblyLightweight and non-weight-bearingThe net weight of the height-increasing tripod is 23.7g, which does not affect the flight speed and does not cause flight burden.Installation steps(Increasing tripod + buoyancy bar)1. Hook the small rubber ring on the raised part of the side of the height-enhancing tripod, and at the raised part of the bottom, and the other side is the same.2. Align the connector on the front of the booster stand with the connector on the bottom of the drone fuselage.3. Secure the thick O-ring from one side of the heightening stand to the other side.4. Place the buoyancy bar, use a thin O-ring to fasten one side, and wrap it around to the other side to fix it.5. Installation is completeInstallation steps(higher tripod)1. Hook the small rubber ring on the raised part of the side of the height-enhancing tripod, and at the raised part of the bottom, and the other side is the same.2. Align the connector in front of the height-enhancing stand with the connector on the bottom of the drone fuselage3. Wind the thick O-ring from one side of the heightening stand to the other side to fix it.4. Installation is completePlease pay attentionRemove the rubber band when storing the folding standWhen installing the buoyancy rod, fasten the thin O-ring in the opposite direction