Pro-Series - Vortec 4200 625cc/min, 62lb/hr Set of 6 injectors

Made in The USA in collaboration with Bosch, The Snake Eater Pro-Series 620's use only the highest quality internal components, materials and are ran through an incredible amount of injections before arriving at your door. The SEP Pro-Series line is our top of the line, no expense spared, closest flow and offset matched injector line. These injectors are intended for the customer who is scratch building a motor, intends to run high rpm for long duration or simply wants to trust their fuel system to the best name brand in fuel injection. Testimonials SEP Pro-Series Customer PTS Fab running SEP Pro-Series Injectors on Methanol Flow Testing Injectors will be within 1% flow variance on a multi point dynamic test. Full Injector Flow/Offset report included in package and Plug and Play ECU tuning data for all SEP Injectors included with purchase via email request. (Plug and Play ECU data/Injector characteristics provided by Calibrated Success Inc./Greg Banish) Fuel Compatibility All known hydrocarbon fuels and oxygenators Crank Horsepower Rating @58psi fuel pressure, 93 octane, V8 engine with 1 injector per cylinder: 700hp Connector: uscar (EV1) Flow Rate @43psi: 620cc/min, 62lb/hr @58psi High Impedance 12.5 ohms coil  *** It is IMPERATIVE when running high flow fuel injectors you run a 10 Micron inline aftermarket fuel filter system!!! Failing to do so will allow debris COMMONLY found in pump gasses into the injector body and begin to alter fuel flow rates and/or cause TOTAL FAILURE of fuel injectors voiding your warranty and damaging your engine*** Vehicle Compatibility Intended to directly replace the OEM injector for the Vortec 4200 Series engines For Vortec 2800 and 2900 click here: For Vortec 3500 and 3700 click here: Legal Disclaimer This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles 1967 and older U.S. manufactured Federally Certified vehicles 1967 and older Foreign manufactured vehicle The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street WARNING: It is against the law to install this part on an Emissions Controlled Vehicle The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles 1968 and newer U.S. manufactured Federally Certified vehicles 1968 and newer Foreign manufactured vehicle