POLARIS SLINGSHOT REAR 1 X 10" SUBWOOFER ENCLOSURE WITH NXL-10SUB/BK - FITS EITHER PASSENGER OR DRIVER SIDE
DS18 SLG-RSUB10LD Polaris Slingshot Rear 1 X 10" Subwoofer Enclosure With NXL-10SUB/BK Feel the bass in your Polaris Slingshot with DS18’s SLG-RSUB10LD: a subwoofer enclosure installed in the Rear Storage Compartment behind Polaris Slingshot seats! Adding this durable 10” Subwoofer Enclosure into your Polaris Slingshot’s sound system will instantly increase the quality and feel of the bass response it reproduces. Fitted perfectly for rear storage compartments in all Polaris Slingshot models, when combined with all enclosures in our SLG series, the SLG-RSUB10LD reinforces an impenetrable soundstage designed to cut through the noise of the open road! The high powered NXL-10SUB was built to bring the bass on your Slingshot to life. Designed with an IP65 marine-grade frame, this 10-inch subwoofer is guaranteed to deliver hard-hitting bass that will stand up to the elements. Plus, its UV compliant cone and butyl rubber surround make it stable enough to withstand the open air design of the Slingshot. Not only does the NXL-10SUB bring the BOOM with its 300 watts RMS and 600 watts max power handling and 4-Ohm impedance, it also features integrated RGB lights that can be connected to any RGB 4-wire circuit for a customizable ambiance that will match your mood or color scheme. (LED-BTC recommended) Install this subwoofer enclosure into your Polaris Slingshot’s sound system seamlessly through use of the factory bolts and mounting location. Upgrade your sound system today with DS18’s SLG-RSUB10LD and experience the ultimate in subwoofer performance. Highlights Durable PE (Polyethylene) waterproof enclosure with UV Protection Easy to install – all hardware and wiring included OFC tinned 12GA wiring for more power handling and durability Fits Slingshot Models From 2015 or Later Works on both driver and/or passenger side storage compartments Coated metal bracket for better resistance to the elements 75ft3 Ported/Vented Enclosure Type Damping material for better subwoofer performance Great For Polaris Slingshot Models 2015+ Technical Details Download SLG-RSUB10LD Product Manual GENERAL Speaker Size 10" / 254mm Total Impedance 4 Ohms Total RMS Power Handling 300W Total MAX Power Handling 600W Sensitivity (1w/1m) 89dB Frequency Response 35-250Hz Recommended Lo Pass Crossover 100Hz SPEAKER SPECIFICATIONS Voice Coil Diameter 2" / 50.8mm Voice Coil Former Material Glass fiber Winding Material CCAW Cone Material Injection Molded Polypropylene + UV Compliant Dust Cap Material PPI Surround Material Butyl (Rubber) Basket Material High Temp Injection Molded Composite (ASA) with UV Protection coating Magnet Material Ferrite Magnet Weight 72oz BOX SPECIFICATIONS Internal Volume 0.75 ft3 / 21L Load Configuration Single Box Type Ported / Vented Port Tuned (Fb) 40Hz Box Material Polyethylene (PE) Finish Material Black -3Db Dropping Point (F3) 45Hz UV Protection Yes Waterproof Rating IP65 MEASUREMENT Overall Height 18.78" / 477mm Overall Width 15.25" / 388mm Overall Depth 14.31" / 363.3mm