LSE-210A BASS PACKAGE 2 X SLC-MD10.4 IN A PORTED BOX WITH S-1500.1/RD AMPLIFIER AND 4-GA AMP KIT 800 WATTS

DS18 LSE-210A Bass Package 2 x SLC-MD10.4 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 800 Watts If you are looking for a lot of thumping bass and a very clean prefab box, we here at DS18 have developed a very strong package to fit one of our bestselling subwoofers that we have to offer in a complete box! Now you don have to worry about building a box by yourself to spec for your new subwoofer purchase because you can buy them together with 1 easy click of the mouse. This beautiful ported box is tuned to 42Hz. The ½ inch thick treated MDF ensures the box will be tough enough to withstand very strong vibrations along with giving very accurate acoustical resonances for the perfect bass response. Inside the box is two of our best-selling subs, the MD10.4 subwoofer. These subs have a 32 oz ferrite magnet and can take up to 200 watts RMS each and 800w maximum power! With a 4 ohm configuration on the 2 inch 4-layer voice coil, you will have no problem making power out of your amplifier because the final load will be optimal and with a sensitivity of 85.2dB. With this you wont miss out on any of the wide range of frequencies this sub and box combo can produce!Included in this kit is the amplifier to drive it! The included S-1500.1 class AB amp will provide you 350w RMS to perfectly power this package . To install everything you also receive a DS18 installation AMPKIT4 4 gauge kit.  Highlights Two of our best selling MD10.4 sub giving you amazing low bass and great wattage handling. High Quality prefabricated DS18 subwoofer box that not only looks great but brings out low and loud bass easily. Ported design tuned to 42hz. Included DS18 Class AB amplifier delivering 350w RMS to give you the perfect to subwoofer matchup. Included 4 gauge amplifier kit so you can have all the tools to power up your new DS18 Subwoofer package. Technical Details Download LSE-201A Product Manual General Speaker Size 2 x 10” Total Impedance 2 Ohms Total RMS Power Handling 400 watts Total MAX Power Handling 800 watts Sensitivity (1w/1m) 94 dB Frequency Response 35 - 250Hz Recommended Lo Pass Crossover 90Hz Subwoofer Voice Coil Diameter 50.8mm (2”) Voice Coil Former Material Aluminum Winding Material SV Cone Material PPI Surround Material Rubber Surround Material Steel Magnet Material Ferrite Magnet Weight 32 oz Box Specifications Port Tune 42Hz Internal Volume 68L Load Configuration Front Porte Box Material 1/2" MDF Finish Material Carpet Measurements: Height 13.78” / 350mm Width 30.71” / 780mm Depth 1 11” / 280mm Depth 2 14” / 356mm