Triac Dimmable Driver 60W (Standard Size)

Waterproof IP67 Triac dimmable 12v 60w led driver Waterproof performance is higher than MOSO's dimming power supply 12V, which can work normally and stably in humid indoor and outdoor environments Model SMT-012-060VT SMT-024-060VT output DC Voltage 12V 24V Voltage Tolerance ±0.5V Rated current 5A 2.5A Rated power 60W input Voltage Range 100-130Vac(UL,ETL)170-265Vac(CE)180-265Vac(SAA) Frequency Range 47~63HZ Power Factor 0.65(Full loading) Efficiency(Typ.) 85% 87% AC Current(Max.) 1.0A 1.0A Leakage current ﹤0.50mA/120VAC Protection Short Circuit Hiccup mode, recover automatically after fault condition is removed Over Current ≤1.2*I out Over Loading ≤120% Over temperature 100℃±10℃,Shut down o/p voltage,recover automatically after temperature goes down. Environment Working TEMP. -40~+60℃ Working Humidity 20~90%RH, non-condensing Storage TEMP. Humidity -40~+80℃,10~95%RH TEMP .coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz,2G 12min./1 cycle,period for 72min. each along X,Y,Z axes  Safety& EMC   Safety standards UL8750+UL1310  Class 2 unit Withstand voltage I/P-O/P:1500VAC   Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH EMC EMISSION FCC Part 15 B others Net. Weight 0.55KG(ETL,CE,SAA)0.95KG(UL) Size 180*60*35mm(ETL,CE,SAA)(L*W*H)200*70*46(UL)(L*W*H) Packing 430*375*190mm     20PCS/CTN Notes 1. All parameters if NOT specially mentioned are measured at 110VAC input , rated load and 25℃of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage. 3.Loading should be 5-100%. [Custom Product Tab] ¡ùInput Brown with AC (L),Blue with AC(N),Green/Yellow with AC(G) ¡ùOutput Red is£¨DIM+£©,Black is£¨DIM-£© Dimming Operation n?Output constant current level can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer. n?Compatible with Leading edge or tailing edge triac dimmers. n?please try to use the small power dimmer, have access to a wider dimming range, high-power dimmer is difficult to achieve the output current to zero [/Custom Product Tab]