Cisco D9854 Advanced Program Receiver With POWER SUPPLY

BRAND: CISCO CONDITION: USED - TESTED AND WORKS AS EXPECTED Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.  MODEL: D9854 Advanced Program Receiver With POWER SUPPLY   If you’re looking for a multifaceted receiver, look no further than the Cisco® D9854-I Advanced Program Receiver (Figure 1). Designed for satellite and terrestrial content distribution applications requiring Digital Video Broadcasting - Satellite (DVB-S), Digital Video Broadcasting - Satellite - Second Generation (DVB-S2), and IP reception capabilities, it has advanced digital outputs for digital tier program distribution. A built-in decoder can decode a MPEG-2 or MPEG-4 Advanced Video Coding (AVC) high definition (HD) program for analog monitoring or a standard definition (SD) down-conversion for composite. MPEG-2 or MPEG-4 AVCSD programs can also be decoded for analog and Serial Digital Interface (SDI) output. The Cisco D9854-I comes with RF, ASI, and MPEG over IP (MPEGoIP) input combined with a high-quality SDI or HD-SDI output and optional MPEGoIP output. able 1 provides product specifications for the Cisco D9854-I Advanced Program Receiver.   Table 1.       Product Specifications   Feature Description System Standards MPEG-2 and DVB compatible EN 300 421, EN 300 468 Demodulation DVB-S QPSK, DVB-S2 QPSK and 8PSK Tuner RF inputs Number of RF inputs 4 (1 active at a time) Input level -25 to -65 dBm per carrier Frequency range 950 to 2150 MHz Symbol rate range ●  DVB-S: ◦    1.0 to 45 MSymbols/s ●  DVB-S2: ◦    10.0 to 30 MSymbols/s ◦    1.0 to 10 MSymbols/s (contact Cisco) Carrier capture range ≥ ±3.0 MHz (1-10 Msymbols) ≥ ±5.0 MHz (10-30 Msymbols) Satellites C-band and Ku-band Input impedance 75 Ohm ASI input MPEG-2 transport input EN50083-9, DVB-ASI coaxial, 188/204 byte packets MPEGoIP Input Physical RJ-45 Ethernet 100BASE-T Ethernet, and 1000BASE-T Ethernet FEC FEC based on SMPTE 2022 for MPEGoIP input Input modes UDP Raw, RTP, FEC Rates Up to 180 Mbps Analog Outputs Analog HD Video Output Number of channels 1 Video decompression type MPEG-2 4:2:0 and MPEG-4 AVC 4:2:0 (Optional) Video standard 1080i at 29.97 frames per second (fps), 1080i at25 fps, 720p at59.94 fps, and 720pat 50 fps Horizontal video resolutions 1080i: 1920, 1440, and 1280 720p: 1280, 960, and 640 Analog SD Video Output Number of channels 1 (2 identical outputs) Video decompression type MPEG-2 4:2:0 and MPEG-4 AVC 4:2:0 Video standard NTSC and PAL B/G/I/D/M/N Maximum video resolution 720x480 and 576 video output