Silicon Power 512GB-3.8TB Enterprise Grade SATA III 6Gb/s 2.5-inch Internal Solid State Drive

[Product Features] • 2.5” standard form factor with SATA standard interface connector. • Compliant with SATA revision 3.1 standard with 6.0 Gb/s transfer rate. • Compliant with ATA/ATAPI-8 standard and ACS-2 command protocol. • Built-in-Voltage detector for power shielding FW protection. • Native Command Queuing up to 32 commands • Garbage collection and TRIM Data Set Management command • Global wear leveling algorithm evens program/erase count • Early weak block retirement - Supports SMART feature command set. • Supports 28/48 bit LBA mode command • Built-in temperature sensor (Thermal Throttling) function to adjust the access speed of NAND flash and keep the SSD system stable. • Standard IPC A-610E [Product Specifications] • ECC Capability: Hardware LDPC ECC engine (120bit/1KB) and Block/Page RAID• Program / Erase Endurance: 3,000 P/E cycles• Optimal sustained performance: Direct-To-TLC and SLC Cache Architecture • Data Endurance & Data integrity: StaticDataRefresh technology, Early weak block retirement, Global Wear leveling• Data Retention: ****- 10% of program / Erase Endurance cycles: 10 Years- 100% of program / Erase Endurance cycles: 1 Years• Performance: (Maximum Read/Write)*-512GB:  540/520 MB/s-1TB: 540/510 MB/s-2TB: 540/510 MB/s(Test Platform: Average Value is based on Serial ATA 6.0Gb/s interface.)• IOPS:*-512GB: 49,000/82,000 -1TB: 51,000/85,000-2TB: 50,000/85,000• TBW:-512GB: 728TB-1TB: 1456TB-2TB: 2912TB• Humidity: 10% to 95% RH, non-condensing• Operating System: Windows XP/7/8/10, or Windows Embedded Systems, DOS, Linux*The value is various bases on the capacity and the test platform.**Duration: 30 min x 3 axis*****The value is based on normal program/erase endurance at room temperature. High environmental temperature may shorten the retention period.