1080p HDMI™ Extender (Over IP, Loop, IR) - 500ft (cat6)-HD-EXM330-K

OREI 1080p Over IP Extender over Ethernet up to 330 feet - With Uni-directional IR (HD-EXM330-K) HDMI 1.4 and HDCP 1.4 compliant Video resolutions up to 1080p@60Hz 6.75Gbps video bandwidth HDMI loop output port on the transmitter unit to connect a display at the source Signal transmission distance up to 100 meters / 330 feet over a CAT6 cable Standard 1G & 2L Switch connection support Note: This device does not work over your existing LAN switch, it requires a dedicated network switch Uni-direction IR control signal transmission (from receiver to transmitter) Compact design and easy plug-and-play installation The HD-EXM330-K is an over-IP (one to many) HDMI extender, that can be connected to a standard 1GB switch or any 2L switch, enabling multiple receivers to be connected to the switch. It can extend HDMI signals up to 330 feet at 1080P@60Hz. It is HDMI 1.4 and HDCP 1.4 compliant, supporting video resolutions up to 1080p@60Hz (Full HD) with a video bandwidth of 6.75Gbps. The device features uni-directional IR pass-through from the receiver unit to the transmitter, to control the source device from the receiver’s location. The transmitter unit has an HDMI loop output port to connect a display at the source location. With a compact design and robust build, this device is ideal for commercial and personal uses. [tab] CONNECTIVITY Transmitter: INPUT: 1 × HDMI [Type A, 19-pin female] OUTPUT: 1 × HDMI [Type A, 19-pin female] 1 × CAT [RJ45, 8-pin female] CONTROL: 1 × IR OUT [3.5mm Stereo Mini-jack] Receiver: INPUT: 1 × CAT [RJ45, 8-pin female] OUTPUT: 1 × HDMI [Type A, 19-pin female] CONTROL: 1 × IR IN [3.5mm Stereo Mini-jack] PACKAGE CONTENTS 1x Transmitter 1x Receiver 1x IR Blaster cable 1x IR Receiver cable 2x Power Adapter User Manual SUPPORTED CAT CABLES CAT5e, CAT6, CAT7: We recommend you use shielded CAT6 cables & High-Quality HDMI Cables for optimum performance EXTENDING DISTANCE 1080P@60Hz: 330 Feet VIDEO OUTPUT Video Bandwidth: 6.75Gbps Video Resolutions: Up to 1080p@60Hz ADDITIONAL FEATURES CEC: No ARC: No USB KVM: No PoC/PoE: No IR Control: Yes Downmix: No Downscale: No Over IP: Yes HDBaseT: No RS-232: No LOOP-OUT/LOCAL PORT Has loop out port: Yes Number of Loop out ports: 1 AUDIO SUPPORT HDMI Audio Formats: PCM 2.0ch COMPLIANCES HDMI Compliance HDMI 1.4 HDCP Compliance HDCP 1.4 POWER Power Consumption: TX: 1.5W (Max) & RX: 1.1W (Max) Power Supply: Input: AC 100-240V 50/60Hz Output: DC 5V/2A DIMENSIONS & WEIGHT Transmitter: Length: 88mm / 3.47in Width: 61.2mm / 2.41in Height: 16.5mm / 0.65in Weight: 158g / 5.57oz Receiver: Length: 88mm / 3.47in Width: 61.2mm / 2.41in Height: 16.5mm / 0.65in Weight: 155g / 5.47oz PROPERTIES Color: Black Housing: Metal Enclosure WARRANTY 1-Year Manufacturer's Warranty [/tab]  [tab1] FAQs Can I purchase the replacement parts such as power adapter, receiver/transmitter, or IR Kit from OREI? Yes, you can purchase these things directly from us. Please contact us & we will assist you further. Can I extend multiple screen with this product? No, this product doesn not extend multiple screens. It will duplicate the input sources to multple outputs. Can I extend beyond the mentioned distance? Yes, you will be able to get a signal beyond the mentioned distance but the quality of the video decreases with increase in the distance and that too when using with shielded CAT6 cable. Can I input the output of this product to another extender similar to daisy chain method? Yes, you can implement the daisy chain method. What is the recommended type of CAT cable? Both the ends of the CAT cable should be termed as EIA-568B & the cable should be straight & not crossed. What types of HDMI & CAT cables I should use with this product? We recommend you to use High-Quality HDMI cables & shielded CAT6 cables. Can I purchase additional transmitter? Yes, you can purchase the additional transmitter from us. Please contact us & we will let you know the price. Can I purchase additional receivers? Yes, you can purchase the additional receiver from us. Please contact us & we will let you know the price. Can we upscale/downscale the video resolutions? No, this product doesn't upscale/downscale the video resolutions. Up to what length I can extend this product? You can extend the display devices up to 400 Feet when using with a shielded CAT6 cable. I am not getting signal with CAT5e cable but when I switch to CAT6, the issue gets resolved. How to make this unit work with CAT5e? The issue might be with the CAT cable. This might be due to the external interference of the signals & CAT5e has low bandwidth as compared to the CAT6. We recommend you using shielded CAT6 cable. How to know if the extender is dead? If the power and link led lights does not illuminate on the RJ45 port of the transmitter and the receiver, then the transmitter & receiver might be dead. Please contact us so that we can troubleshoot the issue. How can I upgrade the firmware? You can upgrade the firmware by connecting the PC & this device via RS-232 cable. I am unable to make the CEC work, what should I do to make this work? Please note that this product only supports the CEC function between HDMI input & HDMI output 1. Can I get CEC to work with optical output? No, optical output doesn't supports CEC due to its limitations. CEC will work only with HDMI devices. What is HDBaseT Extender? HDBaseT is the technology used for long distance transmission of lossless signals, resulting extremely low latency & giving the best picture quality. What is the difference between the normal extenders & HDBaseT extenders? In normal extenders, if you extend your signals up to some extend, the quality of the signals will degrade & you may find some latency issues. HDBaseT is the lastest standard which provides extending your signals to the longer distance without degrading the quality of the signals & with 0 latency. We recommend you using a shielded CAT6 cables for optimum performance. Does this product supports IR Frequency or FR Frequency? Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products. I am unable to get the remote to work with IR, how to connect the IR Blaster/Emitter & IR Receiver? The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver. Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control var acc = document.getElementsByClassName("accordion"); var i; for (i = 0; i [/tab1] [shortdes] Over IP (one-to-many) HDMI extender up to 330ft Video resolutions up to 1080p@60Hz Uni-directional IR functionality [/shortdes]