
Revopoint POP 3D Scanner for 3D Printer
Revopoint POP 3D Scanner is no bigger than a smartphone, with a weight of 200g, which you can carry to any outdoor monument spot. You are able to take a very special “3D photo” with the POP scanner, and bring it back to 3D print, a duplicate of any object you like. Too many cables from traditional 3D scanners make them difficult to connect and operate, which is not acceptable for a real artist. This is why we designed Revopoint POP 3D Scanner with a minimalist approach —— with only one USB cable that works both as a power cable and a data transfer cable. Revopoint POP 3D Scanner takes advantage of the infrared invisible light (the same light you used for decades to control your TV from a remote) to avoid strong light stimulation. The algorithm of the POP is efficient and lightweight. Its built-in chip can finish most of the calculation & mapping work, so the Revopoint POP 3D scanner does not require a strong CPU or GPU from the connected PC/Phone/Pad. While conventional 3D scanners use complex software which is intimidating, Revopoint POP 3D Scanner is extremely inclusive instead. With constant reminders of the scanning progress and results, all relevant progress and information are displayed on the software interface in real-time. Also, if you encounter a problem during the scanning process, you can also pause, undo and make corrections at any time PRODUCT SPECIFICATIONS Product model POP 3D scanner Technology Dual camera infrared structured light Single capture accuracy Up to 0.3mm Single capture range 210mm x 130mm Working distance 275mm±100mm Minimum scan volume 50×50×50 Scan speed Up to 8 fps Light source 1 class infrared Laser(eye-safe) Alignment Feature alignment, marker point alignment Output format STL、PLY、OBJ Texture scan Yes Special object scanning For the transparent and highly reflective objects, please spray powder before scanning Outdoor scanning Avoid direct sunlight, best timing is 1 hour around the sunset Scanner weight ≤225g Dimensions 154.6×38.2×25.6 Printable data output Able to export 3D model directly to 3D printing Required PC/Phone configurations Windows810,64-bit/ Android6 .0. or above