Crestron PRO2 2-Series Professional Dual Bus Control System Processor

Crestron PRO2 2-Series Professional Dual Bus Control System Processor Crestron 2-Series Control Systems are the brains of a complete integrated AV or automation solution. Every audio, video, and environmental element of the home, boardroom, classroom, or command center becomes integrated and accessible through the control system. Crestron 2-Series control systems are unmatched for power, performance and scalability, providing the ideal choice for today's demanding control applications. Features: 2-Series engine | Dual-bus architecture Compact Flash memory card slot Cresnet port - master/slave selectable 10/100 Ethernet capable | SSL encryption e-Control 2 and RoomView enabled SNMP support | Built-in firewall, NAT and router 6 Com ports, 8 IR/serial ports, 8 Versiport I/O ports, 8 Relay ports 3 Y-Bus / 1 Z-Bus control card expansion slots Internal power supply | 2-Space EIA rack-mountable Front control panel with LCD display Specifications: Processor:CPU: 32-bit Freescale ColdFire Microprocessor Memory: SDRAM: 64 MB NVRAM: 256 KB Flash: 4 MB Compact Flash: expandable up to 2 GB (not included) Operating System: Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL Windows and SIMPL+ Ethernet: With C2ENET-1: 10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control2 XPanel and RoomVie applications With C2ENET-2: All above features plus: built-in firewall, router, and network address translator (NAT) Y-Bus Connectors & Expansion Slots: 40 Mb/s parallel communications; Internal backplane for integrated control ports and Y-Bus expansion slots COM A - F: (6) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; Ports C-F support C2N-NPA8 Network Poll Accelerator INFRARED-SERIAL OUTPUT A - H: (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port allowing simultaneous firing of all ports I/O Versiports 1 - 8: (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin RELAY OUTPUT 1 - 8: (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts Expansion Slots: (3) Y-Bus expansion slots; Accept all Y-Bus control cards Z-Bus Expansion Slots: 300 Mb/s parallel communications; Backplane for Z-Bus expansion slots Expansion Slot: (1) Z-Bus expansion slot; Accepts all Z-Bus control cards Additional Connectors: Computer: (2) DB9 female; Front and rear panel RS-232 computer console ports Net: (1) 4-pin 5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator 100-250V~2.3A 50/60 Hz: (1) IEC Socket; Mates with removable power cord, included Ground:(1) 6-32 screw, chassis ground lug Reset Buttons: HW-R: Hardware reset (reboots the control system) SW-R: Software reset (restarts the SIMPL program) Menu Buttons: Functions: (6) Up to 6 dynamically assigned functions based upon current menu Menu: (1) Returns the LCD display to the MAIN menu ∧, ∨: (2) Scroll up or down through any list displayed in the LCD display BKLT: (1) Toggles through 4 levels of backlight intensity for the LCD display LCD Display: (2) lines, (40) characters per line; Reverse mode (yellow and black) backlit LCD; Displays system information, configuration menus, and custom programmable user functions LED Indicators: PWR: (1 green) Indicates AC power supplied to unit NET: (1 yellow) Indicates Cresnet bus activity MSG: (1 red) Indicates control system has generated an error message LNK A: (1 red) Indicates a valid connection on LAN port A ACT A: (1 red) Indicates activity on LAN port A LNK B: (1 red) Indicates a valid connection on LAN port B ACT B: (1 red) Indicates activity on LAN port B COM A - F (TXD, RXD, RTS, CTS): (24 red) Indicate activity on each respective COM port IR-SERIAL A - H: (8 red) Indicate activity on each respective IR/Serial port INPUT-OUTPUT 1 - 8: (8 red) Indicate activity on each respective I/O Versiport RELAY 1 - 8: (8 red) Indicate contact closure at each respective relay port SLOT 1 - 3: (3 red) Illuminates to indicate presence of a card in the respective expansion slot; extinguishes momentarily to indicate activity Power Requirements: Main Power: 2.3 Amps, 100-250 Volts AC, 50/60 Hz Available Cresnet Power: 50 Watts (shared with control card expansion slots) Environmental: Temperature: 41° to 113°F (5° to 45°C) Humidity: 10% to 90% RH (non-condensing) Enclosure: Chassis: Steel, black matte powder coat finish Faceplate: Extruded aluminum, black matte powder coat finish with polycarbonate label overlay Mounting: Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions: Height: 3.56” (9.04cm); 3.47” (8.81cm) without feet Width: 17.03” (43.26cm); 19” (48.26cm) with ears Depth: 10.36” (26.31cm) With C2ENET-1 + C2IR-8 Manufacturer: Crestron Model Number: 2-Series  Part Number: PRO2 Condition: In Stock, Ready to Ship! This unit is in very good physical condition. See Photos. Guaranteed in good working order and covered by a 14 day policy. This listing is only for what is shown in the photos. No other parts or pieces are included.