AlphaBot2 Mobile Robot Development Platform for Rasberry Pi (no Pi)

Description Designed to use with an Arduino compatible controller Including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication functions Easy to assemble by snapping the parts, no soldering nor wiring needed Open source dexemple included Raspberry Pi 3 B+ Computer Board not included This AlphaBot2 Mobile Robot Development Platform for Rasberry Pi 3 (no Pi) is designed to use with an Arduino compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc. Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. Only a few minutes is needed for the hardware assembing. View more What's Included 1 X AlphaBot2-Pi (adapter board) 1 X AlphaBot2-Base (base chassis) 1 X RPi Camera (B) 1 X Micro SD Card 16GB 1 X Power adapter US standard 5V/2.5A USB output 2 X SG90 servo 1 X 2 DOF pan and tilt kit 1 X IR remote controller 1 X FC-20P cable 8cm 1 X USB type A plug to micro B plug cable 1 X 15PIN FFC 25cm 1 X AlphaBot2-Pi screws 1 X Micro SD Card Reader (Extra Free) 1 X Screwdriver (Extra Free) Dimensions Links PDF File AlphaBot2 Mobile Robot Development Platform for Rasberry Pi - Datasheet AlphaBot2 Mobile Robot Development Platform for Rasberry Pi - Schmeatic ZIP File Example Code Specifications 1. AlphaBot2 control interface: for connecting sorts of controller adapter board 2. Ultrasonic module interface 3. Obstacle avoiding indicators 4. Omni-direction wheel 5. ST188: reflective infrared photoelectric sensor, for obstacle avoiding 6. ITR20001/T: reflective infrared photoelectric sensor, for line tracking 7. Potentiometer for adjusting obstacle avoiding range 8. TB6612FNG dual H-bridge motor driver 9. LM393 voltage comparator 10. N20 micro gear motor reduction rate 1:30, 6V/600RPM 11. Rubber wheels diameter 42mm, width 19mm 12. Power switch 13. Battery holder: supports 14500 batteries 14. WS2812B: true color RGB LEDs 15. Power indicator AlphaBot2-Base, the lower base chassis: 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking Onboard modules like line tracking, obstacle avoiding, needs no messy wiring TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating N20 micro gear motor, with metal gears, low noise, high accuracy Onboard RGB LEDs, true color lighting, pretty cool AlphaBot2-Ar, the upper adapter board for controller: Onboard Arduino interface, into which Arduino controller can be directly plugged 0.96inch 128x64 yellow/blue dual color OLED TLC1543 AD acquisition chip PC8574 I/O expander, avoid I/O shortage Xbee connector, for connecting dual-mode Bluetooth module