HOBBYSTAR 160A 1/10 COMPETITION SENSORED ESC WITH TURBO/BOOST

The all-new HobbyStar 160A 1/10 Competition ESC has the same buttery smooth operation HobbyStar competition ESC's are known for, with all-new internal components and a 160A rating for the most powerful 1/10 race setups. Also features a new adjustable BEC with either 6V or 7.4V output at 5A (versus 3A on previous versions). Sporting an eye-popping list of available adjustments and the same footprint of a standard 120A ESC, the HobbyStar 160A ESC sets a new standard for 1/10 competition-level speed controls.    Features selectable 3rd channel adjustment.  Via program settings, you can assign a knob or switch on your radio to adjust 1 of 14 available settings on the fly.   ESC comes with power and motor leads already soldered on, and an updated triple capacitor bank.     NOTE:  This ESC is NOT for drag race use with 6.5T and lower turn motors.   PENDING ROAR APPROVAL    Available Adjustments:   Running Mode: Forward/brake, forward/Reverse/brake and forward/reverse Cutoff Voltage: Auto or by voltage ESC Overheat Protection Setting: By temperature Motor Rotation: Normal/reverse Race Mode and Stock Mode: Provide targeted base-profiles for both 4.5T-9.5T motors and 10.5T and above Dead Band: By percentage BEC Output: 6V/7.4V @5A Throttle IP limiter: To control initial power hit based on track conditions Throttle Rate: Controls overall throttle power for varying track conditions Drive Frequency: To fine-tune the throttle feeling from smooth to aggressive RPM Lock: Allows locking in a specific RPM for drifting applications Throttle Curve: Linear or custom Initial Brake: By percentage Drag Brake: By percentage Brake Force: By percentage I-Brake Response: Controls the initial brake power response to the motor for varying track conditions Brake Rate: Controls overall brake power for varying track conditions Brake Frequency: To fine-tune the brake feeling from smooth to aggressive Brake Curve: Linear or custom Boost Timing: By degrees Boost Trigger Level: 1-50 Boost Trigger Rate: To set the speed of boost timing application Turbo Timing: By degrees Turbo Actuation: Method Turbo Delay: By time Turbo Start RPM: RPM Turbo On-Rate: 1-10 Turbo Off-Rate: Instant-10   Programming: Must use the 160A & 220A LCD Program Card or Starlink USB link and PC application to program ESC.   Specifications:   Continuous Current: 160A Burst Current: 1200A Resistance: 0.0003ohm Suitable Car: 1/10, 1/12 Motor Type: Brushless sensored or sensorless 2-pole  Motor Limit: 5.5T (2S), 7.5T (3S) Cell Count: 2-3S LiPo, 5-10S NiCd/NiMh BEC Output: 6V/7.4V @5A Dimensions (without fan): 36.4x38.1x31mm Weight: 50g (without fan/wires)   NOTE: This ESC is best suited for 1/10 2WD buggies, SCT's and 1/10 4WD buggies with 540 2-pole motors.  NOT for use on 4WD SCT's or with 4-pole motors.