Elevate All Purpose Sealant - 10 oz.

AP Sealant is a single-component polyurethane non-sag moisture-curing sealant. It can be used to caulk sheet metal, masonry, brick, and concrete block. It may be used as an exterior sealant at termination bar details and as a fastener sealer over fastener heads per current Elevate specifications and details.  Method of Application 1. Surfaces to receive AP Sealant must be clean, dry, sound, frost-free, and grease-free. If grease or oil is present, it must be removed with a suitable solvent prior to the application of AP Sealant. 2. Apply AP Sealant to substrates above 40 °F (4 °C). 3. AP Sealant is supplied in cartridges or sausage chubs ready to apply. Do not open cartridges until all substrate cleaning and preparation work has been completed. 4. Fill joints from the deepest point to the surface by holding a properly sized nozzle against the back of the joint. 5. Dry tooling is recommended. 6. DO NOT use soapy water when tooling.  Storage Store in original unopened containers at tempe