Code Alarm CATX-50 Keyless Alarm Starter Fob H5OT43

This remote works on these Code Alarm systems: CA1050, CA2050, CA5050.  The FCC ID of this remote is H5OT43.  The Code Alarm Part Number is CATX50.  This can be used to replace the following Type 9 Transmitters: CATX1B, CATX1TW, CATXMLC, CATXMT, CAT1, CAT1MTW, CAT4, CATX100, CPL100TX, CATX4.  Remotes are tested on keyless entry signal testers to be sure they are working properly before we ship them to you. Programming Procedure:1) Enter the vehicle, and turn the ignition switch to the ON position.2) Press and release the Programming button switch 3 times.3) Press and hold the LOCK button of the transmitter you wish to program.4) The lights will flash 1 time, indicating that the system is accepting the programming of channel #1 which is lock. Repeat step 3 for each transmitter you wish to program.5) Press and release the valet push button switch 1 time to advance to channel 2.6) Press and hold the UNLOCK button of the transmitter you wish to program. 7) The lights will flash 1 time, indicating that the system is accepting the programming of channel #2 which is unlock. Repeat step 6 for each transmitter you wish to program.8) Press and release the valet push button switch 1 time to advance to channel 3.9) Press and hold the TRUNK button of the transmitter you wish to program.10) The lights will flash 1 time, indicating that the system is accepting the programming of channel #3 which is trunk. Repeat step 9 for each transmitter you wish to program.11) Press and release the valet push button switch 1 time to advance to channel 4.12) Press and hold the STAR button of the transmitter you wish to program.13) The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which is remote start. Repeat step 12 for each transmitter you wish to program.