Sofirn SP36 BLF Anduril 4x Sumsung LH351D 5650LM Anduril Flashlight Driver Multiple Operation Super Bright 18650 Flashlight (5000K)

Specification: Product name: Sofirn SP36 BLF Anduril Brand: Sofirn Model: SP36 BLF Anduril Emitter Type: 4x LH351D Light temperature: 5000K Mode: Smooth ramping or mode set operation Material: Aerospace grade aluminum alloy construction Total Emitters: 4x Battery Configurations: 3 x 18650 button top (not included) Working Voltage: 2.8v-4.2v Switch Type: Electronic switch Switch Location: Side of the flashlight Peak Beam Intensity: 31,000+ cd Impact Resistant 1.2meters Max Output: 5650 lumens Range: 352+ meters (max) Lens: High transmittance glass Reflector: Aluminum alloy mirror reflective cup Waterproof: IPX-7 waterproof Color: Black Size: 126.7mm x 50mm (Length x Diameter) Features: 1. The program used for this product is Anduril 2. For detailed operation instructions, please see the product operation instructions below; 3. Charging function: adopt type C interface, charging parameter is: 5Vdc 2Amax;     Red indicator on: charging,     Green indicator on: Full,     Flashlight function can be used normally when charging. 4. Multiple Operation Procedure 5. Stepless dimming from: 1LM to 5650LM 6. Standby current: less than 50uA Package Included: 1 x Sofirn SP36 BLF Anduril Flashlight 1 x Spare Waterproof O Ring 1 x User Manual User Manual: Click Here For User Manual Stepless dimming mode operation:   1. When off : Single click to switch on (the brightness of the boot is the memory brightness); 2. In any mode: Double click is Turbo; 3. When off: Long press to dim from the darkest; 4. When power-on: Long press the brightness to increase; Single click + Long press the brightness to decrease; 5. When power-on: Flash after three click, switch the dimming mode (smooth dimming to step dimming)   6. When power-on: Fast 4 clicks into the dimming configuration: 1) Smooth stepless dimming settings: - Minimum brightness setting: Press n under the first low-light strobe to start with the lowest brightness starting from the nth level (a total of 150 levels); - Maximum brightness setting: Press n under the second low-light strobe to be the highest brightness of 150-n level;   2) Stepless stepless dimming setting: - Minimum brightness setting: Press n under the first low-light strobe to start with the lowest brightness starting from the nth level (a total of 150 levels); - Maximum brightness setting: Press n under the second low-light strobe to be the highest brightness of 150-n level;   3. Dimming step number setting: press n under the third low-light strobe to be step-type stepless dimming to n level; 2<=n<=150; Lock Function:   1. When off: fast 4 hits, flash 2 flashlight lock; fast 4 hits again, flash to unlock the flashlight. 2. Press the button to turn on the flashlight (the brightness is low), and release the flashlight to turn off; 3. When locked: three strikes change the indicator status: no low high flash cycle Instant light mode:   When off: fast 5 click toenter; button is on (memory brightness), loose key off; power off to exit this mode; Muggle mode:   In the off state, fast 6 click Accessibility:   1. Battery voltage viewing mode: 1) In the off state: 3 hit into the battery voltage view mode: for example, flash 3 times first, then flash 7 times after 1 second, the current voltage is 3.7V; repeat flash after 2 seconds, click to exit the battery voltage view mode; 2) Double click to enter the Good Night mode:   2. Good night mode: 1) Click Shutdown; 2) Double click to enter the signal mode;   3. Signal mode: 1) Click Shutdown; 2) Double click to enter the temperature viewing mode; 3) 4 hits the interval setting of each flash of the signal light; press n in the low-light strobe to flash the signal light for n seconds;   4. Temperature viewing and setting mode: 1) Temperature viewing mode: for example, 3 flashes first, then 7 flashes after 1 second, the current voltage is 37 °C; 2) Click Shutdown; 3) Double click to enter the battery voltage view mode;   4) 4 hits into the temperature design mode: Pressing n in the first low-light strobe is to check the current temperature. (It is recommended to set it under the flashlight cooling); for example, the room temperature is 22 °C, click 22 times; Pressing n in the second low-light strobe is the maximum temperature limit. For example, if you want to limit the maximum temperature of the flashlight to 50 °C, then n is 50-30=20 times; (the maximum temperature limit should be greater than 30 °C) Blinking mode (The following 4 modes are with memory, click under shutdown, click and then press to enter the memory mode (but candlelight mode default))   1. Candle mode: 1) Click Shutdown; 2) Double click to enter the bicycle flash mode; 3) Three-stroke extended candlelight mode for 30min; (time to shut down, there is no time limit by default, so you need to set the time yourself) 4) Long press the brightness to increase the dimming; click to lengthen the dimming according to the brightness;   2. Bicycle flash mode: 1) Click Shutdown; 2) Double click to enter the party/tactical flash mode; 3) Long press the brightness to increase the dimming; click to lengthen the dimming according to the brightness;   3. Party/tactical flash mode 1) Click Shutdown; 2) Double click to enter lightning mode; 3) Long press the flashing frequency to speed up; click to lengthen the flashing frequency to decrease;   4. Lightning mode: 1) Click Shutdown; 2) Double click to enter the candle mode; Indicator light:   The indicator light is green The power-on status indicator is on: it is dim when the main light is low, and bright when the main light is high; In the power-off state, click the switch button status 7 times quickly: Off and bright flashes.