SpeedyBee F405 WING APP Flight Controller
The SpeedyBee F405 WING APP Fixed Wing Flight Controller is designed for superior fixed-wing drone performance. With an STM32F405 MCU and ICM-42688-P IMU, it ensures precise control. It features a built-in barometer and OSD chip for enhanced altitude hold and on-screen displays. Multiple UART and I2C ports offer extensive connectivity, supporting a variety of peripherals. Compatible with INAV and ArduPilot firmware, it's a versatile and reliable choice for drone enthusiasts, providing detailed flight data and seamless integration with ELRS/CRSF receivers. SPECIFICATIONS: Part#: SB-F405WING-APP Flight Controller: MCU: STM32F405, 168MHz, 1MB Flash IMU (Gyro & Accelerometer): ICM-42688-P Barometer: SPL006-001 OSD Chip: AT7456E Blackbox: MicroSD Card Slot UART: 6 sets (USART1, USART2, USART3, UART4, UART5, UART6 (Dedicated for Wireless board Telemetry connection)) I2C: 1x (Used for magnetometer, digital airspeed sensor) ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed) PWM: 12x (11 + 1 “LED” pad) ELRS/CRSF receiver: Supported, connected to UART1 SBUS: Built-in inverter for SBUS input (UART2-RX) LED: 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red), 1x RGB RSSI: Supported, Named as RS Supported FC Firmware: INAV (SpeedyBeeF405WING - default), ArduPilot (SpeedyBeeF405WING) Weight: 8.9g PDB: Input voltage range: 7~36V (2~6S LiPo) Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) Battery Current Sensor: 90A continuous, 215A peak. Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot) TVS Protective diode: Yes FC BEC output: Output 5.2V +/- 0.1V DC. Continuous current 2.4 Amps, 3A Peak. Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip VTX BEC output: Output 9V +/- 0.1V DC. Continuous current 1.8 Amps, 2.3A Peak. Voltage adjustable, 9V Default, 12V or 5V via jumper. Designed for Analog Video Transmitter, Digital Video Transmitter, Camera Servo BEC output: Output 4.9V +/- 0.1V DC. Continuous current 4.5 Amps, 5.5A Peak. Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper. Designed for Servos Weight: 11.4g Wireless USB Extender: Wireless Configuration (long press BOOT button for 6 seconds to switch modes): BLE mode, connect to Speedybee APP; Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.; Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes): 4x WS2812 LED strip connectors, adjustable colors and flashing modes. Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads On-board battery level indicator: 4x RGB indicator LED for battery level display by number of lights Weight: 4.2g HELPFUL LINKS: Manual INCLUDES: (1) SpeedyBee F405 WING APP Flight Controller(1) Hardware Set