Suzuki ATV UTV Wheel Studs

Studs For All Suzuki ATV and UTV's!!!!!!! Most Suzuki ATV's and UTV's Dont have a part Number to Cross Reference there studs they will only sell you a complete hub Assembly!! The Fact is these are pressed in at the factory and can be pressed out and Replaced!! All Suzuki's Studs Use a 10MM x 1.25 Thread that is Approximately 1.35" Long the only Difference is the size of the Knurl Diameter and Pitch. To Find the Correct Wheel Stud You MUST measure the Knurled Diameter There are Three Different Varations  Knurl Diam    .481                         .421                         .406 Thread            10MM x 1.25            10MM x 1.25           10MM x 1.25 Length             1.375"                       1.3"                          1.3"   We have tried to narrow down what studs fit which models before but suzuki changes the studs from year to year from front to back so without a part # to cross reference this makes it very difficult so we have set up this guide to clear som